TarotTarot - Servo Tester TL2638-02

Tarot New Servo Tester TL2638-02

Description

• This servo tester makes it easy to detect and set servo dummy, dither and neutral positions
• Can be synchronized output control 4 servos and used to compare the performance steering gear
• Control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds)
• Can test the steering gear is able to respond to subtle changes
• With PPM signal test function in the display the input PPM
• Signal changes while the input the PPM signal synchronization output to the servo.

Product Parameters

• Input: DC 4.8-6.0v
• Output signal width:800-2200us
• Size:75*34*25mm
• Weight:26.5g
• Operation mode mode: Manual, Automatic, Neutral
• Pulse width setting:50HZ, 125HZ, 250HZ

Instructions for use

• Refer to the product wiring drawings,the left side of the terminal supply part 4.8-6V voltage input,the right side of the 4-way signal output(the upper middle and lower are "signal S", "positive +", "negative -"),can be connected to 4 servers.

[Select] button:

1:Energized automatically into [S-1] manual mode (Manual) and in 20 microseconds/50HZ analog servo signal cycle, rotating the potential to increase or decrease the signal width.

2:Press the [Select] button once to enter the [S-2] mode for the [Neutral] test.

3:Continue pressing the [Select] button once to enter the [S-3] mode for [Automatic] testing.

4:Continue to press the [Select] button to switch back to [S-1] Manual mode and cycle through them in turn.

Pulse Width button

1:Power on to automatically be in the 20us/50HZ analogue servo signal cycle.

2:Press the [Pulse Width] button once to enter a digital servo signal cycle of 8us/50HZ.

3:Continue to press the [Pulse Width] button once to enter a digital servo signal cycle of 4us/250HZ.

4:Continue to press the [Pulse Width] button once for 20us/50HZ and so on. 

Packages Includes

• 1 x Servo Tester