DroneX 2026: Office Closure Notice
3DXR is pleased to confirm that we will be attending DroneX 2026. As a result, our offices will be closed from Wednesday 30 September to Friday 2 October.
Please note that orders placed after 1:30 PM on Tuesday 29 September will not be dispatched until Monday 5 October.
Thank you for your understanding and continued support.
SKU12042 - Holybro M10 Secondary GPS (JST GHR1.25mm 6pin cable):
The M10 GPS uses multi-constellation GNSS powered by u-blox M10 series, a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently.
It also comes with the IST8310 compass, tricolored LED indicator, buzzer, and a safety switch. There are 3 different connectors options for different purposes. This module ships with a baud rate of 115200 5Hz.
The high-gain 25 x 25 mm patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts.
Firmware Support for M10 GPS:
Features:
Specifications
**Please always check the manufacturer's website for the latest specifications.**
|
GNSS Receiver |
Ublox M10 |
|
Number of Concurrent GNSS |
Up to 4 GNSS |
|
BeiDou |
|
|
Galileo |
|
|
GLONASS |
|
|
GPS |
|
|
QZSS |
|
|
Frequency Band |
GPS L1 |
|
Galileo E1 |
|
|
GLONASS L1 |
|
|
BeiDou B1 |
|
|
SBAS L1 |
|
|
QZSS L1 |
|
|
Compass |
IST8310 |
|
Output Protocol |
UBX (U-blox) |
|
NMEA |
|
|
Accuracy |
2.0m CEP |
|
Nav. Update Rate |
Up to 25 Hz (single GNSS), |
|
Up to 10 Hz (4 concurrent GNSS) |
|
|
GNSS Augmentation System |
EGNOS, GAGAN, MSAS and WAAS |
|
QZSS: L1S |
|
|
Default Baud Rate |
115200 |
|
Input Voltage |
4.7-5.2V |
|
Port Type |
JST-GH-10P |
|
Antenna |
25 x 25 x 4 mm ceramic patch antenna |
|
Power consumption |
Less than 200mA @ 5V |
|
Operating Temperature |
-40~80C |
|
Dimension |
φ50 x14.4 mm |
|
Weight |
32g |
|
Cable Length |
26cm (42cm cable purchase separately) |
|
Other |
Tri-color LED |
|
Onboard Buzzer |
|
|
Safety Switch |
|
|
LNA MAX2659ELT+ RF Amplifier |
|
|
Rechargeable Farah capacitance |
|
|
Low noise 3.3V regulator |
Package contains:
SKU12042 - Holybro M10 Secondary GPS (JST GHR1.25mm 6pin cable):
The M10 GPS uses multi-constellation GNSS powered by u-blox M10 series, a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently.
It also comes with the IST8310 compass, tricolored LED indicator, buzzer, and a safety switch. There are 3 different connectors options for different purposes. This module ships with a baud rate of 115200 5Hz.
The high-gain 25 x 25 mm patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts.
Firmware Support for M10 GPS:
Features:
Specifications
**Please always check the manufacturer's website for the latest specifications.**
|
GNSS Receiver |
Ublox M10 |
|
Number of Concurrent GNSS |
Up to 4 GNSS |
|
BeiDou |
|
|
Galileo |
|
|
GLONASS |
|
|
GPS |
|
|
QZSS |
|
|
Frequency Band |
GPS L1 |
|
Galileo E1 |
|
|
GLONASS L1 |
|
|
BeiDou B1 |
|
|
SBAS L1 |
|
|
QZSS L1 |
|
|
Compass |
IST8310 |
|
Output Protocol |
UBX (U-blox) |
|
NMEA |
|
|
Accuracy |
2.0m CEP |
|
Nav. Update Rate |
Up to 25 Hz (single GNSS), |
|
Up to 10 Hz (4 concurrent GNSS) |
|
|
GNSS Augmentation System |
EGNOS, GAGAN, MSAS and WAAS |
|
QZSS: L1S |
|
|
Default Baud Rate |
115200 |
|
Input Voltage |
4.7-5.2V |
|
Port Type |
JST-GH-10P |
|
Antenna |
25 x 25 x 4 mm ceramic patch antenna |
|
Power consumption |
Less than 200mA @ 5V |
|
Operating Temperature |
-40~80C |
|
Dimension |
φ50 x14.4 mm |
|
Weight |
32g |
|
Cable Length |
26cm (42cm cable purchase separately) |
|
Other |
Tri-color LED |
|
Onboard Buzzer |
|
|
Safety Switch |
|
|
LNA MAX2659ELT+ RF Amplifier |
|
|
Rechargeable Farah capacitance |
|
|
Low noise 3.3V regulator |
Package contains:
3DXR does not store or process credit card information.
All payments are handled securely by PCI DSS compliant payment providers.
Our systems are regularly monitored and screened for fraudulent activity.
UK Delivery Options
Free UK Standard Delivery on orders over £99* (excluding certain items such as batteries).
(Typically delivered next working day, subject to courier collection cut-off times.)
International Delivery Options
UK Returns
Unused items in original condition can be returned within 14 days for refund or 30 days credit refund.
Please refer to the full Returns Policy for further details Returns Policy – 3DXR
International and B2B Returns
Please refer to the full Returns Policy for further details Returns Policy – 3DXR
All returns must be authorised by 3DXR before being sent back. Please email info@3dxr.co.uk to request confirmation.
Contact us by email at info@3dxr.co.uk with any questions you have about this product.
Commercial
UAV supplier
Large UK
Held stock
Trusted by
Industry & Academia
Professional
UAV systems
You May Also Need
Recently Viewed
