Reach M+ only RTK GNSS module for precise navigation and UAV mapping without GCP
Centimetre accuracy for surveying, mapping and data collection.
centimeter accuracy. Use fewer GCPs
Usually autopilot triggers the camera and records the coordinate it has at that moment. When the drone is flying at 20 m/s and GPS works at 10 Hz, that means your autopilot will have position readings only each 4 m, which is not suitable for precise georeferencing. In addition, there is always a delay between the trigger and the actual moment the photo is taken.
Reach solves the problem of positioning by connecting directly to the camera hot shoe port, which is synced with the shutter. The time and coordinates of each photo are logged with a resolution of less than a microsecond. This method allows GCPs to be used only to check your accuracy. 1. Connect Reach to a hot shoe port on a camera Every time a photo is taken camera produces a pulse on a flash hot-shoe connector which is synced to a shutter opening. 2. Fly a drone, Reach will record photo events Reach captures flash sync pulses with sub-microsecond resolution and stores them in a raw data RINEX log in the internal memory. 3. Download logs from Reach and base station After the flight, get the RINEX logs from your airborne Reach module and a base station (Reach RS, CORS or another receiver).
4. Process logs and get a file with geotags of photos Process RINEX files using free RTKLIB software. The produced file with precise coordinates of the photos can be used for georeferencing.
To calculate centimeter-precise coordinates in PPK and RTK, Reach needs corrections from a base station. It could be either another Reach receiver or an NTRIP service. VRS is also supported. Compatibility Reach M2 works seamlessly with other Reach receivers over any link and are compatible with any other receiver that supports RTCM3 and NTRIP. Reach M2 and Reach RS2Provides robust performance and quick initialization. Allows working on long baselines.
Up to 60 km
Up to 100 km
Up to 20 Hz
ReachView is the most user-friendly software for data collection that is available both for Android and iOS. With ReachView, you can control all the features of Reach receivers, such as setting up a base station, logging RINEX data, configuring NMEA output, and monitoring data.
control** Reach is able to trigger cameras as well as register events. The event mark feature is a must for aerial mapping as it allows the precise time when the shutter was activated to be registered.
Logs are automatically recorded directly to RINEX in the internal memory. View a list of the logs and download them using the ReachView app.
data** ReachView shows current satellite levels, your location on a map, and much more
Reach M2** Mechanical
Free UK standard delivery for orders over £99*. (excludes certain items such as batteries)
Next Day delivery available with DHL Express to the UK, USA and most of Europe available
Saturday Delivery Available in the UK
For full details on our delivery services click here.