{"product_id":"rfd-900ux-modem-bundle","title":"RFD 900ux Modem - Bundle","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 1.5em;\"\u003eRFD900ux Bundle:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cp\u003e2 x RFD900ux Radio Modems\u003c\/p\u003e\n\u003cp\u003e1 x Antenna, 900MHz Quarter wave monopole 2.1dBi\u003c\/p\u003e\n\u003cp\u003e1 x Antenna, 900MHz Right Angle Quarter wave monopole 2.1dBi\u003c\/p\u003e\n\u003cp\u003e4 x Antennas, 900MHz Half wave dipole 3dBi\u003c\/p\u003e\n\u003cp\u003e1 x FTDI USB cable\u003c\/p\u003e\n\u003cp\u003e4 x RFD900u antenna cable (RPSMA)\u003c\/p\u003e\n\u003cp\u003e1 x 900ux to 8 way socket cable\u003c\/p\u003e\n\u003cp\u003e1 x PIXH2 to RFD900ux Telemetry Cable 150 mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003cspan style=\"font-size: 1.5em;\"\u003eRFD900ux New Features:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eFully compatible with RFD900x modems.\u003c\/li\u003e\n\u003cli\u003eAir data rate up to: 500kbit\/s.\u003c\/li\u003e\n\u003cli\u003eAES Hardware accelerated encryption.\u003c\/li\u003e\n\u003cli\u003eRC PPM Pass through with telemetry at the same time.\u003c\/li\u003e\n\u003cli\u003eSiK point to point firmware.\u003c\/li\u003e\n\u003cli\u003eAsynchronous multi-point firmware, Synchronous multi-point firmware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eLong range \u0026gt;40km depending on antennas and GCS setup\u003c\/li\u003e\n\u003cli\u003e2 x u.FL RF connectors, diversity switched.\u003c\/li\u003e\n\u003cli\u003e1 Watt (+30dBm) transmit power.\u003c\/li\u003e\n\u003cli\u003eTransmit low pass filter.\u003c\/li\u003e\n\u003cli\u003e\u0026gt; 15dB Low noise amplifier, high IP3.\u003c\/li\u003e\n\u003cli\u003eRX SAW filter.\u003c\/li\u003e\n\u003cli\u003eAll I\/O ESD protected and filtered.\u003c\/li\u003e\n\u003cli\u003eRe implemented SiK and Multipoint SiK firmware, field up-gradable, easy to configure.\u003c\/li\u003e\n\u003cli\u003eSmall, light weight.\u003c\/li\u003e\n\u003cli\u003eLicense free use in Australia, Canada, USA, NZ\u003c\/li\u003e\n\u003cli\u003eNote: Not compatible with 900+ modems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e Interfaces:\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eRF : 2x u.FL RF connectors\u003c\/li\u003e\n\u003cli\u003eSerial: Logic level TTL (+3.3v)\u003c\/li\u003e\n\u003cli\u003ePower: +5v, ~800mA max peak (at maximum transmit power)\u003c\/li\u003e\n\u003cli\u003eGPIO: General purpose IO (Digital, ADC, PWM capable).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Range:  902 - 928 MHz (USA) \/ 915 - 928 MHz (Australia)\u003c\/li\u003e\n\u003cli\u003eOutput Power: 1W (+30dBm), controllable in 1dB steps ( +\/- 1dB @=20dBm typical )\u003c\/li\u003e\n\u003cli\u003eAir Data transfer rates: 12, 56, 64, 100, 125, 200, 224, 500 and 750 kbit\/sec (User settable, 64kbit default)*\u003c\/li\u003e\n\u003cli\u003eUART data transfer rates: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 1M baud (User settable, 57600 default)*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*note these values are correct as of version 3.07 SiK firmware\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eOutput Power: 1W (+30dBm)\u003c\/li\u003e\n\u003cli\u003eReceive Sensitivity: \u0026gt;121 dBm at low data rates, high data rates (TBA)\u003c\/li\u003e\n\u003cli\u003eSize: 25 mm (wide) x 33 mm (long) x 10.4 mm (thick) - Including RF Shield, PCB and Heatsink.\u003c\/li\u003e\n\u003cli\u003eWeight: 10g\u003c\/li\u003e\n\u003cli\u003eMounting: SMT Soldered\u003c\/li\u003e\n\u003cli\u003ePower Supply: +5 V nominal, (+3.5 V min, +5.5 V max), ~800 mA peak at maximum power\u003c\/li\u003e\n\u003cli\u003eTemp. Range: -40 to +85 deg C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSoftware \/ GCS Support:\u003c\/p\u003e\n\u003cp\u003eThe software solution is an open source development called \"SiK\".  It has been re implemented to suit the new processor architecture available on the 32bit ARM processor core.  A boot loader and interface is available for further development and field upgrade of the modem firmware via the serial port. Most parameters are configurable via AT commands, Eg. baud rate (air\/uart), frequency band, power levels. Integrated support for configuring the RFD900 radios is supported by APM Planner. The default settings are at 57600 baud, N, 8, 1, and 64k air data rate. The RFD900ux manual is here: \u003ca href=\"http:\/\/files.rfdesign.com.au\/Files\/documents\/RFD900ux%20DataSheet%20v1.2.pdf\"\u003eRFD900ux Manual\u003c\/a\u003e The RFD900ux SiK software manual is here : \u003ca href=\"http:\/\/files.rfdesign.com.au\/Files\/documents\/RFD900x%20Peer-to-peer%20V3.X%20User%20Manual%20V1.2.pdf\"\u003eRFD900x Peer-to-peer Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSoftware features include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency hopping spread spectrum (FHSS)\u003c\/li\u003e\n\u003cli\u003eTransparent serial link\u003c\/li\u003e\n\u003cli\u003ePoint to Point, or Multipoint networking\u003c\/li\u003e\n\u003cli\u003eConfiguration by simple AT commands for local radio, RT commands for remote radio\u003c\/li\u003e\n\u003cli\u003eUser configurable serial data rates and air datarates\u003c\/li\u003e\n\u003cli\u003eError correction routines, Mavlink protocol framing (user selectable)\u003c\/li\u003e\n\u003cli\u003eMavlink radio status reporting (Local RSSI, Remote RSSI, Local Noise, Remote Noise)\u003c\/li\u003e\n\u003cli\u003eAutomatic antenna diversity switching on a packet basis in realtime\u003c\/li\u003e\n\u003cli\u003eAutomatic duty cycle throttling based on radio temperature to avoid overheating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompliance:\u003c\/p\u003e\n\u003cp\u003eThe RFD900ux is designed to be compliant with the following standards:\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eFCC Part 15.247 (Frequency hopping and digitally modulated intentional radiators)\u003c\/li\u003e\n\u003cli\u003eAS\/NZS 4268:2012 (Radio equipment and systems - short range devices)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe modem is designed for system integrators who will integrate the modem into their own projects and product prototypes.  The user is responsible for compliance with local regulations for radio transmitters.\u003c\/p\u003e","brand":"RF Design","offers":[{"title":"Default Title","offer_id":64658018500957,"sku":"RFD-00049-054","price":240.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/RFD900uxModem-Bundle.jpg?v=1778431886","url":"https:\/\/www.3dxr.co.uk\/products\/rfd-900ux-modem-bundle","provider":"3DXR","version":"1.0","type":"link"}