{"product_id":"rf-design-rfd-900x-us-v2-modem-fcc-approved","title":"RF Design - RFD 900x-US V2 Modem (FCC Approved)","description":"\u003cp\u003e\u003cspan style=\"color: #000000; font-size: 14px;\"\u003eRFD 900X-US \u003cstrong\u003ev2\u003c\/strong\u003e- single radio modem only. This is the US version that is FCC Certified. For end use in the US - see details below.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**Please note this is version 2 , please see comparison table for two versions below**:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/62a722b4ce29f618RFD900x\u0026amp;868x_v1_vs_v2_Comparison_Table_Updated_13_May.JPG\" alt=\"\" width=\"1574\" height=\"852\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e1 x 900X-US Radio Modem only - for full setup see the radio modem bundles\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 14px;\"\u003eRFD900x-US New Features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eRadio parameters pre-configured and locked for FCC compliance with CFR15.247\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eNew Processor, ARM 32 bit core.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eAir data rate: 250kbit\/s.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eAES Hardware accelerated encryption. *Fully working*\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eRC PPM Passthrough with telemetry at the same time.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eFully ESD protected + filtered - Every IO port is protected and filtered.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eOriginal SiK point to point firmware implemented.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 14px;\"\u003eFeatures:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eLong range \u0026gt;40km depending on antennas and GCS setup *80km demonstrated by Edge Research labs on a balloon, 57km in India, on Dipoles.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e2 x RP-SMA RF connectors, diversity switched.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1 Watt (+30dBm) transmit power.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eTransmit low pass filter.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u0026gt; 20dB Low noise amplifier, high IP3.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eRX SAW filter.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eAll I\/O ESD protected and filtered.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eRe implemented SiK, field up-gradable with compatible SiK firmware, easy to configure.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eSmall, light weight.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eLicense free use in Canada \u0026amp; USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eNote: Not compatible with older modems\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 14px;\"\u003e Interfaces:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eRF : 2 x RP-SMA connectors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eSerial: Logic level TTL (+3.3v)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003ePower: +5v, ~800mA max peak (at maximum transmit power)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eGPIO: 6 General purpose IO (Digital, ADC, PWM capable).\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 14px;\"\u003eSpecifications:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eFrequency Range:  902 - 928 MHz (USA)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eOutput Power: 1W (+30dBm), controllable in 1dB steps ( +\/- 1dB @=20dBm typical )\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eAir Data transfer rates: 12, 56, 64, 100, 125, 200, 224, 500 and 750 kbit\/sec (User settable, 64kbit default)*\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUART data transfer rates: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 1M baud (User settable, 57600 default)*\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e*note these values are correct as of version 3.07 SiK firmware\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eOutput Power: 1W (+30dBm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eReceive Sensitivity: \u0026gt;-114 dBm at low data rates, high data rates \u0026gt;-98dBm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eSize: 30 mm (wide) x 57 mm (long) x 12.8 mm (thick) - Including RF Shield, Heatsink and connector extremities\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eWeight: 18g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eMounting: 3 x M2.5 screws, 3 x header pin solder points\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003ePower Supply: +5 V nominal, (+3.5 V min, +5.5 V max), ~800 mA peak at maximum power\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eTemp. Range: -40 to +85 deg C\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 14px;\"\u003eSoftware \/ GCS Support:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eMost parameters are configurable via AT commands, Eg. baud rate (air\/uart), power levels. Integrated support for configuring the RFD900 radios is supported by APM Planner. The default settings are at 57600 baud, N, 8, 1, and 64k air data rate. The RFD900x-US manual is here: \u003ca href=\"http:\/\/files.rfdesign.com.au\/Files\/documents\/RFD900x%20DataSheet%20V1.1.pdf\"\u003eRFD900x Manual\u003c\/a\u003e The RFD900x-US SiK software manual is here : \u003ca href=\"http:\/\/files.rfdesign.com.au\/Files\/documents\/RFD900x%20Peer-to-peer%20V3.X%20User%20Manual%20V1.2.pdf\"\u003eRFD900x Peer-to-peer Manual\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003eSoftware features include:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eFrequency hopping spread spectrum (FHSS)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eTransparent serial link\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003ePoint to Point\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eConfiguration by simple AT commands for local radio, RT commands for remote radio\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUser configurable serial data rates and air datarates\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eError correction routines, Mavlink protocol framing (user selectable)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eMavlink radio status reporting (Local RSSI, Remote RSSI, Local Noise, Remote Noise)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eAutomatic antenna diversity switching on a packet basis in real time\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eAutomatic duty cycle throttling based on radio temperature to avoid overheating\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 14px;\"\u003eCompliance:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eThe RFD900x-US is compliant with the following standards:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eFCC Part 15.247 (Frequency hopping and digitally modulated intentional radiators) FCC ID: 2ADLE-900X\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RF Design","offers":[{"title":"Default Title","offer_id":63500370936157,"sku":"RFD-01-07-900X-US-v2","price":140.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1613321602-93957000_ec669711-3bb0-41d1-aaba-1f697c493bb1.jpg?v=1772033536","url":"https:\/\/www.3dxr.co.uk\/products\/rf-design-rfd-900x-us-v2-modem-fcc-approved","provider":"3DXR","version":"1.0","type":"link"}