{"product_id":"matek-systems-gnss-sam-m10q","title":"Matek Systems - GNSS SAM-M10Q","description":"\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003eSAM-M10Q\u003c\/strong\u003e uses multi-constellation GNSS module powered by u-blox SAM-M10Q-00B.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eThe SAM-M10Q features the u-blox M10 standard precision GNSS platform and provides exceptional sensitivity and acquisition time for all L1 GNSS signals. SAM-M10Q supports concurrent reception of four GNSS (GPS, GLONASS, Galileo, and BeiDou). The high number of visible satellites enables the receiver to select the best signals. This maximizes the position availability, in particular under challenging conditions such as in deep urban canyons. u-blox Super-S (Super-Signal) technology offers great RF sensitivity and can improve the dynamic position accuracy in non-line-of-sight scenarios.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eThe high-gain 15 x 15 mm2 patch antenna provides the best balance between performance and small size. The omnidirectional antenna radiation pattern increases flexibility for device installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eMore details about the SAM-M10Q, pls check out \u003c\/span\u003e\u003ca style=\"font-size: 14px;\" href=\"https:\/\/www.u-blox.com\/en\/product\/sam-m10q-module\"\u003eu-blox SAM-M10Q\u003c\/a\u003e\u003cspan style=\"font-size: 14px;\"\u003e page\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003ePackage Includes\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x SAM-M10Q\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x JST-GH-4P to JST-GH-4P 20cm silicon wire\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eGNSS \u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/sam-m10q-module\"\u003eu-blox SAM-M10Q-00B\u003c\/a\u003e (GPS, GLONASS, Galileo and BeiDou)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eNo Magnetic Compass built-in\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003ePatch antenna 15*15*4mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eInput voltage range: 4~9V (5V pad\/pin)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003ePower consumption: 10mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUART baudrate: 9600 default\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eOperating Temperatures: -20~80 °C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUART(TX, RX) interface for GNSS SAM-M10Q-00B\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eJST-GH-4P connector (SM04B-GHS-TB). 1.27mm pitch\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eGNSS PPS LED, Green. (Solid ON after powering on,  blinking(1Hz) when GNSS get 3D fix)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eProtocol: UBX(u-blox)  5Hz@GPS+GAL+BDS B1C+GLO or NMEA 1Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e26mm*16mm*8mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e7.5g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003ca href=\"http:\/\/www.mateksys.com\/Downloads\/other\/SAM-M10Q_step.zip\"\u003eSAM-M10Q_step.zip\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eTips and Notes\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eINAV 5.0.0, Betaflight 4.3.0,  ArduPilot 4.3 or newer is required.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUBlox NEO-M9N, MAX-M10S, SAM-M10Q series all don’t have dataflash built in.  once GNSS is powered off and the supercapacitor run out. the settings will back to default.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUBX protocol is bidirectional.  Flight controller firmware can change settings on GPS via UBX protocol. You don’t need to set GNSS module Baud and Frequency in u-center.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eThe default configuration on SAM-M10Q-00B with ublox FW 5.1 is concurrent reception of GPS, Galileo, GLONASS, and BeiDou B1C with QZSS and SBAS enabled.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eStart with u-blox GNSS FW3.01, timepulse is aligned with UTC time and that time is set valid only after leap second is downloaded. That could take up to 12.5 min. Probably PPS LED will not blink immediately after GPS has 3D fixed.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eThe SAM-M10Q provides the ability to reset the receiver. Bridging “RST” pad to Ground for at least 100 ms will trigger a cold start. RESET will delete all information and trigger a cold start. It should only be used as a recovery option. If you are sure wiring and setup are all right. but flight controller can’t detect the GNSS module(grey GPS icon), try doing reset.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eThe scratches on ceramic antenna are the result of tuning the antenna.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eTroubleshoot GPS related issues: \u003ca href=\"http:\/\/www.mateksys.com\/?p=5712#tab-id-6\"\u003ehttp:\/\/www.mateksys.com\/?p=5712#tab-id-6\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":63500308676957,"sku":"MTS-03-02-SAM-M10Q","price":26.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1689694569-90978200_9ee6dc31-df93-452e-ad22-c81d4a1e6aac.jpg?v=1772032819","url":"https:\/\/www.3dxr.co.uk\/products\/matek-systems-gnss-sam-m10q","provider":"3DXR","version":"1.0","type":"link"}