{"product_id":"3dxr-crimping-tool-sn-28b","title":"3DXR Crimping Tool - SN-28B","description":"\u003cp\u003eCrimper for JST-SM \u0026amp; Dupont\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cp\u003eCondition: 100% Brand New\u003c\/p\u003e\n\u003cp\u003eColour: Blue + Black\u003c\/p\u003e\n\u003cp\u003eMaterial: Ni-Cr alloy steel\u003c\/p\u003e\n\u003cp\u003eSize: Approx. (L) x (W) 19 x 13 cm \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003eSmall clamp, feel good.\u003c\/p\u003e\n\u003cp\u003eAutomatic buckle lock, more powerful.\u003c\/p\u003e\n\u003cp\u003eRatchet - type force - connecting rod structure.\u003c\/p\u003e\n\u003cp\u003eCan be adjusted by adjusting the wheel control handle crimping force.\u003c\/p\u003e\n\u003cp\u003eOperation more easily, pressure line faster.\u003c\/p\u003e\n\u003cp\u003eThis crimping tool can be used to crimp both male and female crimp pins onto 18-28 AWG wires to make custom cables.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cp\u003e1.If on a roll, don't cut the pins off, leave them on until the wire is crimped. Prepare the wire by stripping about 1\/8\" (3 mm) of insulation from the end.\u003c\/p\u003e\n\u003cp\u003ePlace the wire in the crimp pin, lining it up so that the stripped portion lies between the inner set of tabs on the crimp pin, while insulated wire lies between the outer set of tabs.\u003c\/p\u003e\n\u003cp\u003e2.If your crimp pins are too short for this method. see the bottom of these instructions for an alternative.\u003c\/p\u003e\n\u003cp\u003ePlace the wire and crimp pin on the appropriate tooth of the tool's die, making sure that the insulated end is on the raised and wider half of the tooth.\u003c\/p\u003e\n\u003cp\u003eThe tabs should point toward the cavity on the other side of the die so that the tool bends them inward around the wire when it closes.\u003c\/p\u003e\n\u003cp\u003e3.Close the jaws of the tool slowly and completely until they release.\u003c\/p\u003e\n\u003cp\u003eThe tabs on a properly crimped pin should form one barrel around the wire conductors and another barrel for strain relief around the wire insulation.\u003c\/p\u003e\n\u003cp\u003e4.Alternatively, if the crimp pins are too short for this method (or if not on a roll), then snap the pin from the holding strip completely.\u003c\/p\u003e\n\u003cp\u003eInsert into the correct slot in the crimping tool and ratchet the crimp tool to just hold in place. Insert the wire from the other end and crimp.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eIncludes\u003c\/h3\u003e\n\u003cp\u003e1 X SN-28B Crimping tool\u003c\/p\u003e","brand":"3DXR","offers":[{"title":"Default Title","offer_id":63500135563613,"sku":"AM-C-05-03-Crimper-SN28-B","price":17.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1654684391-77126300_5cdf71b3-441d-47cd-936a-72fc56f70683.jpg?v=1772030361","url":"https:\/\/www.3dxr.co.uk\/products\/3dxr-crimping-tool-sn-28b","provider":"3DXR","version":"1.0","type":"link"}