Kore – Multirotor Carrier board for Cube Autopilot (Spektreworks)

Home/'The Cube' - Pixhawk 2.1, Autopilots, Carrier Boards, Cubes, Pixhawk 2.1 'The Cube', Pixhawk 2.1 Autopilots/Kore – Multirotor Carrier board for Cube Autopilot (Spektreworks)

Kore – Multirotor Carrier board for Cube Autopilot (Spektreworks)

£200.00 (excl. VAT £166.67)

19 in stock (can be backordered)

The Kore is a carrier board for the Cube autopilot (cube not included)

Providing a convenient layout for multirotors specifically Quads, Octocopters and Octo-Quads (X-8s)


19 in stock (can be backordered)

Product Description

Kore carrier board for the Cube autopilot.


  • Up to 12-cell Lithium battery (50.4V)
  • 140A continuous current with 280A surges
  • Power and signal for ESCs conveniently located in corners
  • 12V navigation light power available at each cornerBuilt-in power distribution
  • Built-in voltage and current sense
  • Redundant power supplies for flight critical components
  • Payload connectors with resettable fuses for 5V, 12V, and direct battery power
  • Good power and error indicator lights
  • Built-in buzzer with volume control
  • Connectors for every function of Pixhawk Cube
  • Easily accessible PWM voltage level selector (3.3V or 5V)
  • Resistant to ground bounce on PWM signal
  • Connector-compatible with standard ProfiCNC carrier board
  • Connector ports for debugging IO and FMU processors


  • 4-pin JST GH
  • 6-pin JST GH


  • 4-pin Clik-Mate 1.25mm (for 5V payload power)
  • 5-pin Clik-Mate 1.25mm (for 12V payload power)
  • 6-pin Clik-Mate 1.25mm (for battery payload power) NOTE: Pixhawk 2.1 Cube NOT included.

Additional Information - Postage Dimensions

Weight0.4 kg
Dimensions22 × 22 × 6 cm


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.