T-Drones M1000 – Build Log – In progress

2019-07-20T22:18:16+01:00June 7th, 2019|On the Build Table|

Overview - M1000 T-Motors new range of UAV the 'T-Drone' series are long endurance platforms each capable of over 60 minutes flight time depending on setup. First to arrive is the M1000, below we document the build process and our thoughts Specification Size - 1000m [...]

S900 with Cube Black and Here 2 – Build Log

2019-07-15T22:44:55+01:00June 7th, 2019|On the Build Table|

Modification and assemble of an S900 with 'The Cube' flight controller. This information is for guidance, it documents some of the key setup procedures carried out and is not a complete guide. Overview- S900 The S900 was a Hexacopter sold by DJI but now discontinued. It is a [...]

The T-Motor AT Series

2019-03-11T10:07:42+00:00March 8th, 2019|Latest Products|

The new and upgraded AT Series designed for Fixed-wing models. The robust body has been designed with a lateral outlet hole and internal heat dissipation structure for increased strength and end enhanced heat dissipation performance. Military grade enamelled wire (including special insulating layer), it not only improves the temperature resistance but also the working [...]

Dronee Plane

2018-06-19T23:41:07+01:00June 19th, 2018|Latest News|

Introducing the dronee Plane Our custom Planes are available for demonstration at our office and flying field located at DL9 4QL. Training is available for individuals and teams. We are a CAA NQE and can provided training for a PFCO or flight tests for Fixed-Wing to customers who do not currently hold a Fixed-Wing [...]

LightWare SF11/C – now in stock

2018-02-18T17:40:23+00:00March 7th, 2017|Latest News, Latest Products|

3DXR is pleased to announce we are now stocking the LightWare SF11/C, this 0 - 120m Laser altimeter is great for centimetre accurate height measurements. Some uses include accurately recording height, obstacle avoidance, improved landings on multirotor, terrain following, better execution of landing on fixed-wing aircraft Product Description SF11/C is a long range (0 … [...]

Comments Off on LightWare SF11/C – now in stock

Pixhawk 2.1 – 1st Batch arrived more on way

2019-03-08T16:57:11+00:00November 18th, 2016|Latest News|

UPDATE   Our 1st batch of Pixhawk 2.1 arrived and had sold out on pre-orders, we expect our next delivery late December, pre-orders now are for the December batch. Pixhawk 2.1 is the latest iteration of Pixhawk, which is an independent open-hardware project. Airframes Pixhawk2 supports different kinds of airframes - helicopters, multicopters, planes, quadplanes and [...]

Comments Off on Pixhawk 2.1 – 1st Batch arrived more on way

Mauch Current Sensors and BEC’s now in stock

2018-02-18T17:40:35+00:00September 28th, 2016|Latest News, Latest Products|

High Quality Power Modules for Pixhawk 2 Now Available from 3DXR. We now have in stock “Hall Sensor” power modules in 2 current ratings – 100A and 200A and also Low Voltage (2-6S LiPo batteries) and High Voltage (4-14S LiPo batteries) These power modules have superb build quality and are supplied with an individual factory [...]

Comments Off on Mauch Current Sensors and BEC’s now in stock
Go to Top