HEX Kore - Multirotor Carrier board for Cube Autopilot (Spektreworks)

The Kore is a carrier board for the Cube autopilot (cube not included) Providing a convenient layout for multirotors specifically Quads, Octocopters and Octo-Quads (X-8s)  

Kore carrier board for the Cube autopilot. FEATURES AT-A-GLANCE

• Up to 12-cell Lithium battery (50.4V)
• 140A continuous current with 280A surges
• Power and signal for ESCs conveniently located in corners
• 12V navigation light power available at each cornerBuilt-in power distribution
• Built-in voltage and current sense
• Redundant power supplies for flight critical components
• Payload connectors with resettable fuses for 5V, 12V, and direct battery power
• Good power and error indicator lights
• Built-in buzzer with volume control
• Connectors for every function of Pixhawk Cube
• Easily accessible PWM voltage level selector (3.3V or 5V)
• Resistant to ground bounce on PWM signal
• Connector-compatible with standard ProfiCNC carrier board
• Connector ports for debugging IO and FMU processors

STANDARD CABLES:

• 4-pin JST GH
• 6-pin JST GH

PAYLOAD POWER CABLES:

• 4-pin Clik-Mate 1.25mm (for 5V payload power)
• 5-pin Clik-Mate 1.25mm (for 12V payload power)
• 6-pin Clik-Mate 1.25mm (for battery payload power) NOTE: Pixhawk 2.1 Cube NOT included.

Free UK standard delivery for orders over £99*. (excludes certain items such as batteries) 

Next Day delivery available with DHL Express to the UK, USA and most of Europe available

Saturday Delivery Available in the UK

For full details on our delivery services click here.