Mauch 017 – PL-2-6s BEC 2 x 5.35V 1 x 12.0V with CFK enclosure

Premium-Line 2-6s BEC with 2 x 5.35V and 1 x 12.0V outputs

Input 2-6S LiPo / max. 28V. Output 2x 5.35V / 3A  + 1x 12.0V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output connector with Molex Clik-Mate 4p. Input wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes. Blue power "ON' LED. (3x) Dimensions

• 32mm x 50mm x 7mm / 19g without CFK enclosure
• 34mm x 52mm x 10mm / 24g with CFK enclosure

Scope of delivery:

• 1x PL-2-6S BEC 2x
• 1x CFK enclosure
• 1x Sensor cable (040) Molex Clik-Mate 4p / L = 150mm
• 1x Backup cable (050) for Pixhawk 2.1 / Molex Clik-Mate 2.0-6p / L = 150mm
• 1x 12.0V output cable one site Molex Clik-Mate 1.25mm-4p, the othersite open. / L = 150mm

REM: The BEC is delivered without an flight controller cable, so please selct the correct cable to match your FC: 041: DF13-6p -> Pixhawk 1 / APM... etc. 042: Molex Clik-Mate 2.0 - 6p -> Pixhawk 2.1 043: JST-GH-6p -> Pixhawk 3... etc

Free UK standard delivery for orders over £99*. (excludes certain items such as batteries) 

Next Day delivery available with DHL Express to the UK, USA and most of Europe available

Saturday Delivery Available in the UK

For full details on our delivery services click here.