Mauch 005 - PL-250 Sensor Board with enclosure- 8AWG

• 250A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS770-250U.
• Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
• This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.

250A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS770-250U.

Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. 

Please check Mauch's manual page for more details.

This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.

Connected to the sensor are 2x15cm AWG8 wire (red) as a standard.

Note: The connector is Molex / Clik-Mate / 1.25mm / 4p (5023800400)

• Without CFK enclosure = 27.5 x 19.5 x 10.5mm / 39g (with 2x 15cm 8AWG)
• With CFK enclosure = 43.5 x 23.0 x 15mm / 44g (with 2x 15cm 8AWG)

This package comes without sensor cable (comes with the BEC's), with CFK enclosure.

Note: If you want to use your own BEC, then please order a sensor cable (040) and ensure that the supplied voltage is within 4.95-5.05V.

Free UK standard delivery for orders over £99*. (excludes certain items such as batteries) 

Next Day delivery available with DHL Express to the UK, USA and most of Europe available

Saturday Delivery Available in the UK

For full details on our delivery services click here.