{"title":"Pl Premium Line Mauch Electronics","description":"","products":[{"product_id":"mauch-003-pl-200-sensor-board-with-cfk-enclosure-10awg","title":"Mauch 003- PL-200 Sensor Board with CFK enclosure - 10AWG","description":"\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e200A - Current \/ Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e200A - Current \/ Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U. Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the manual page for more details. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2. Connected to the sensor are 2x10cm AWG10 wire (red) as a standard. REM: The connector is Molex \/ Clik-Mate \/ 1.25mm \/ 4p (5023800400) Without CFK enclosure = 27.5 x 19.5 x 10.5mm \/ 22g (with 2x 10cm 10AWG) With CFK enclosure = 43.5 x 23.0 x 15mm \/ 27g (with 2x 10cm 10AWG) Delivery without sensor cable (comes with the BEC's), with CFK enclosure REM: If you want to use your own BEC, then please order a sensor cable (040) and ensure that the supplied voltage is within 4.95-5.05V.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63499801624925,"sku":"Mauch-003","price":49.56,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1602614181-98822700.jpg?v=1772027969"},{"product_id":"mauch-015-pl-2-6s-bec-1-x-5-35v-with-cfk-enclosure","title":"Mauch 015 – PL-2-6s BEC 1 x 5.35V with CFK enclosure","description":"\u003cp\u003ePremium-Line 2-6s BEC with 1 x 5.35V output\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eInput 2-6S LiPo \/ max. 28V.\u003c\/span\u003e Output 5.35V \/ 3A -\u0026gt; +\/- 0.05V –\u0026gt; Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +\/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p. Input wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes. Blue power \"ON' LED. 34mm x 22mm x 7mm \/ 7g without CFK enclosure 36mm x 24mm x 10mm \/ 12g with CFK enclosure \u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x PL-2-6S BEC 1x\u003c\/li\u003e\n\u003cli\u003e1x CFK enclosure\u003c\/li\u003e\n\u003cli\u003e1x Sensor cable Molex Clik-Mate 4p \/ L = 150mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eREM: The BEC is delivered without an flight controller cable, so please selct the correct cable to match your FC:\u003c\/strong\u003e 041: DF13-6p -\u0026gt; Pixhawk 1 \/ APM... etc. 042: Molex Clik-Mate 2.0 - 6p -\u0026gt; Pixhawk 2.1 043: JST-GH-6p -\u0026gt; Pixhawk 3... etc\u003c\/p\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63499801788765,"sku":"Mauch-015","price":33.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1602614187-78429700_15989313-ba0d-4262-bc9d-dbcfdd5f3946.jpg?v=1772027969"},{"product_id":"mauch-016-pl-2-6s-bec-2-x-5-35v-with-cfk-enclosure","title":"Mauch 016 – PL-2-6s BEC 2 x 5.35V with CFK enclosure","description":"\u003cp\u003ePremium-Line 2-6s BEC with 2 x 5.35V output\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eInput 2-6S LiPo \/ max. 28V.\u003c\/span\u003e Output 2x 5.35V \/ 3A -\u0026gt; +\/- 0.05V –\u0026gt; Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +\/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p. Input wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes. Blue power \"ON' LED. (2x) 32mm x 36mm x 7mm \/ 11g without CFK enclosure 34mm x 38mm x 10mm \/ 16g with CFK enclosure \u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x PL-2-6S BEC 2x\u003c\/li\u003e\n\u003cli\u003e1x CFK enclosure\u003c\/li\u003e\n\u003cli\u003e1x Sensor cable (040) Molex Clik-Mate 4p \/ L = 150mm\u003c\/li\u003e\n\u003cli\u003e1x Backup cable (050) for Pixhawk 2.1 \/ Molex Clik-Mate 2.0-6p \/ L = 150mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eREM: The BEC is delivered without an flight controller cable, so please selct the correct cable to match your FC:\u003c\/strong\u003e 041: DF13-6p -\u0026gt; Pixhawk 1 \/ APM... etc. 042: Molex Clik-Mate 2.0 - 6p -\u0026gt; Pixhawk 2.1 043: JST-GH-6p -\u0026gt; Pixhawk 3... etc\u003c\/p\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63499801887069,"sku":"Mauch-016","price":57.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1602614188-94328700_494e379e-c08e-403e-9086-603dd7a61c2f.jpg?v=1772027970"},{"product_id":"mauch-001-pl-50-sensor-board-with-cfk-enclosure-12awg","title":"Mauch 001 - PL-50 Sensor Board with CFK enclosure - 12AWG","description":"\u003cp\u003e50A - Current \/ Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-50U. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.\u003c\/p\u003e\u003cp\u003e50A - Current \/ Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-050U. Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.\u003c\/p\u003e\n\u003cp\u003eThis Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.\u003c\/p\u003e\n\u003cp\u003eConnected to the sensor are 2x10cm AWG12 wire (red) as a standard.\u003c\/p\u003e\n\u003cp\u003eREM: The connector is Molex \/ Clik-Mate \/ 1.25mm \/ 4p (5023800400) Without CFK enclosure = 27.5 x 19.5 x 10.5mm \/ 17g (with 2x 10cm 12AWG) With CFK enclosure = 43.5 x 23.0 x 15mm \/ 22g (with 2x 10cm 12AWG) Delivery without sensor cable (comes with the BEC's), with CFK enclosure\u003c\/p\u003e\n\u003cp\u003eREM: If you want to use your own BEC, then please order a sensor cable (040) and ensure that the supplied voltage is within 4.95-5.05V.\u003c\/p\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63499801952605,"sku":"Mauch-001","price":47.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1602614193-82896500_d0764ae0-9ebd-488f-bac8-516ec87ed69c.jpg?v=1772027975"},{"product_id":"mauch-002-pl-100-sensor-board-with-cfk-enclosure-12awg","title":"Mauch 002 - PL-100 Sensor Board with CFK enclosure - 12AWG","description":"\u003cp\u003e100A - Current \/ Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-100U. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.\u003c\/p\u003e\u003cp\u003e100A - Current \/ Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-100U. Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the manual page for more details. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2. Connected to the sensor are 2x10cm AWG12 wire (red) as a standard. REM: The connector is Molex \/ Clik-Mate \/ 1.25mm \/ 4p (5023800400) Without CFK enclosure = 27.5 x 19.5 x 10.5mm \/ 17g (with 2x 10cm 12AWG) With CFK enclosure = 43.5 x 23.0 x 15mm \/ 22g (with 2x 10cm 12AWG) Delivery without sensor cable (comes with the BEC's), with CFK enclosure REM: If you want to use your own BEC, then please order a sensor cable (040) and ensure that the supplied voltage is within 4.95-5.05V.\u003c\/p\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63499801985373,"sku":"Mauch-002","price":47.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1602614195-83177200_f8fd4a8d-ffa1-4cd4-909a-0e94c8892021.jpg?v=1772027975"},{"product_id":"mauch-004-pl-200-sensor-board-with-cfk-enclosure-8awg","title":"Mauch 004 - PL-200 Sensor Board with CFK enclosure - 8AWG","description":"\u003cul bis_size='{\"x\":12,\"y\":14,\"w\":575,\"h\":78,\"abs_x\":500,\"abs_y\":276}'\u003e\n\u003cli bis_size='{\"x\":52,\"y\":14,\"w\":535,\"h\":39,\"abs_x\":540,\"abs_y\":276}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":15,\"w\":532,\"h\":36,\"abs_x\":540,\"abs_y\":277}'\u003e200A - Current \/ Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli bis_size='{\"x\":52,\"y\":53,\"w\":535,\"h\":39,\"abs_x\":540,\"abs_y\":315}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":54,\"w\":525,\"h\":36,\"abs_x\":540,\"abs_y\":316}'\u003e This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp bis_size='{\"x\":12,\"y\":106,\"w\":575,\"h\":39,\"abs_x\":500,\"abs_y\":368}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":107,\"w\":532,\"h\":36,\"abs_x\":500,\"abs_y\":369}'\u003e200A - Current \/ Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":161,\"w\":575,\"h\":39,\"abs_x\":500,\"abs_y\":423}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":162,\"w\":566,\"h\":36,\"abs_x\":500,\"abs_y\":424}'\u003e Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":216,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":478}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":217,\"w\":338,\"h\":17,\"abs_x\":500,\"abs_y\":479}'\u003ePlease check Mauch's \u003ca href=\"https:\/\/mauch-electronic.com\/pl-xxx-sensor-boards\" bis_size='{\"x\":159,\"y\":217,\"w\":82,\"h\":17,\"abs_x\":647,\"abs_y\":479}'\u003emanual page\u003c\/a\u003e for more details. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":252,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":514}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":253,\"w\":546,\"h\":17,\"abs_x\":500,\"abs_y\":515}'\u003eThis Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":287,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":549}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":288,\"w\":442,\"h\":17,\"abs_x\":500,\"abs_y\":550}'\u003eConnected to the sensor are 2x15cm AWG8 wire (red) as a standard. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":323,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":585}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":324,\"w\":455,\"h\":17,\"abs_x\":500,\"abs_y\":586}'\u003eNote: The connector is Molex \/ Clik-Mate \/ 1.25mm \/ 4p (5023800400) \u003c\/span\u003e\u003c\/p\u003e\n\u003cul bis_size='{\"x\":12,\"y\":359,\"w\":575,\"h\":39,\"abs_x\":500,\"abs_y\":621}'\u003e\n\u003cli bis_size='{\"x\":52,\"y\":359,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":621}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":360,\"w\":478,\"h\":17,\"abs_x\":540,\"abs_y\":622}'\u003eWithout CFK enclosure = 27.5 x 19.5 x 10.5mm \/ 39g (with 2x 15cm 8AWG) \u003c\/span\u003e\u003c\/li\u003e\n\u003cli bis_size='{\"x\":52,\"y\":378,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":640}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":379,\"w\":450,\"h\":17,\"abs_x\":540,\"abs_y\":641}'\u003eWith CFK enclosure = 43.5 x 23.0 x 15mm \/ 44g (with 2x 15cm 8AWG) \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp bis_size='{\"x\":12,\"y\":412,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":674}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":413,\"w\":568,\"h\":17,\"abs_x\":500,\"abs_y\":675}'\u003eThis package comes \u003cstrong bis_size='{\"x\":148,\"y\":413,\"w\":52,\"h\":17,\"abs_x\":636,\"abs_y\":675}'\u003ewithout\u003c\/strong\u003e sensor cable (comes with the BEC's), \u003cstrong bis_size='{\"x\":449,\"y\":413,\"w\":29,\"h\":17,\"abs_x\":937,\"abs_y\":675}'\u003ewith\u003c\/strong\u003e CFK enclosure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":447,\"w\":575,\"h\":39,\"abs_x\":500,\"abs_y\":709}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":448,\"w\":533,\"h\":36,\"abs_x\":500,\"abs_y\":710}'\u003eNote: If you want to use your own BEC, then please order a sensor cable (040) and ensure that the supplied voltage is within 4.95-5.05V.\u003c\/span\u003e\u003c\/p\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63499802181981,"sku":"Mauch-004","price":50.31,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1602614203-08706800_154b0e53-f97e-4924-9597-954c8c559d24.jpg?v=1772027976"},{"product_id":"mauch-010-pl-sensor-hub-x2-v2-with-cfk-enclosure","title":"Mauch 010 - PL Sensor Hub X2-V2 with CFK enclosure","description":"\u003cp\u003eThis sensor hub is to connect two PL-xxx current sensors in parallel. The current of both sensors will be summarized and passed to the FC. The voltage measurement of the LiPo packs will be collected from both sensors and passed through the Hub to the FC.\u003c\/p\u003e\u003cp\u003eThis sensor hub is to connect two PL-xxx current sensors in parallel. The current of both sensors will be summarized and passed to the FC. The voltage measurement of the LiPo packs will be collected from both sensors and passed through the Hub to the FC. The main purpose of this hub is to replace existing protection circuits (like an ideal diode) and to monitor, that both paralleled LiPo’s supply the same current to the system. Since we monitor the current of both batteries, we will find out very early when a LiPo starts to fail… before it is too late. If the difference in current is larger than +\/- 15%, the Alarm output will be ON to indicate the fault… the pilot should immediately land and check the batteries. The I2C bus is for future integration. \u003cstrong\u003eTo set up a complete system you would need:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x PL Sensor Hub X2\u003c\/li\u003e\n\u003cli\u003e2x Current sensor board:\u003c\/li\u003e\n\u003cli\u003e2x PL-050 = 2x50A = 0-100A Total\u003c\/li\u003e\n\u003cli\u003e2x PL-100 = 2x100A = 0-200A Total\u003c\/li\u003e\n\u003cli\u003e2x PL-200 = 2x200A = 0-400A Total\u003c\/li\u003e\n\u003cli\u003e1x Power supply, which can be any of the Premium-Line series BEC's\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e39mm x 31mm x 9mm \/ 7g without cables and without enclosure\u003c\/li\u003e\n\u003cli\u003e42mm x 34mm x 10mm \/ 13g with enclosure and without cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e1x PL Sensor Hub X2\u003c\/li\u003e\n\u003cli\u003e1x CFK enclosure\u003c\/li\u003e\n\u003cli\u003e2x Sensor cable \/ Molex 1.25mm - 4p \/ L = 150mm\u003c\/li\u003e\n\u003cli\u003e1x Alarm output cable \/ Molex 1.25mm - 3p \/ L = 100mm\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63499802247517,"sku":"Mauch-010","price":46.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1602614205-43250500_ab32ecd0-857f-4ca0-820d-bb4e0fd46502.jpg?v=1772027976"},{"product_id":"mauch-017-pl-4-6s-bec-2-x-5-35v-1-x-12-0v-with-cfk-enclosure","title":"Mauch 017 – PL-4-6s BEC 2 x 5.35V 1 x 12.0V with CFK enclosure","description":"\u003cp\u003ePremium-Line 4-6s BEC with 2 x 5.35V and 1 x 12.0V outputs\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eInput 4-6S LiPo \/ max. 28V.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOutput 2x 5.35V \/ 3A  + 1x 12.0V \/ 3A -\u0026gt; +\/- 0.05V –\u0026gt; Ripple 10mV (0.2%) at 1.5A output current.\u003c\/p\u003e\n\u003cp\u003eInclusive LDO power supply (+5.00V +\/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output connector with Molex Clik-Mate 4p.\u003c\/p\u003e\n\u003cp\u003eInput wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes. Blue power \"ON' LED. (3x)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32mm x 50mm x 7mm \/ 19g without CFK enclosure\u003c\/li\u003e\n\u003cli\u003e34mm x 52mm x 10mm \/ 24g with CFK enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x PL-4-6S BEC 3x\u003c\/li\u003e\n\u003cli\u003e1x CFK enclosure\u003c\/li\u003e\n\u003cli\u003e1x Sensor cable (040) Molex Clik-Mate 4p \/ L = 150mm\u003c\/li\u003e\n\u003cli\u003e1x Backup cable (050) for Pixhawk 2.1 \/ Molex Clik-Mate 2.0-6p \/ L = 150mm\u003c\/li\u003e\n\u003cli\u003e1x 12.0V output cable one site Molex Clik-Mate 1.25mm-4p, the othersite open. \/ L = 150mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eREM: The BEC is delivered without an flight controller cable, so please select the correct cable to match your FC:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e041: DF13-6p -\u0026gt; Pixhawk 1 \/ APM... etc.\u003c\/li\u003e\n\u003cli\u003e042: Molex Clik-Mate 2.0 - 6p -\u0026gt; Pixhawk 2.1\u003c\/li\u003e\n\u003cli\u003e043: JST-GH-6p -\u0026gt; Pixhawk 3... etc\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63499802313053,"sku":"Mauch-017","price":81.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1651586931-17002800_a877bdd1-efd5-4d73-939e-78dd58fc3626.jpg?v=1772027982"},{"product_id":"mauch-040-pl-sensor-cable","title":"Mauch 040 - PL - Sensor Cable","description":"\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eThis cable connects between any PL-xxx sensor to the Hub X2-V2, or any BEC from the PL - Series.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eThis cable connects between any PL-XXX sensor to the Hub X2-V2, or any BEC from the PL - Series. REM: This cable is standard delivered together with any BEC or Sensor Hub X2-V2\u003c\/span\u003e\u003c\/p\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63499802411357,"sku":"Mauch-040","price":4.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1602679439-72318800_e332a643-74de-4c7e-898a-a61d8f2df333.jpg?v=1772027982"},{"product_id":"mauch-041-pl-fc-cable-for-pixhawk-1-apm-df13-6pin","title":"Mauch 041 - PL - FC cable for Pixhawk 1 \/ APM \/ DF13-6pin","description":"\u003cp\u003eThis cable is for the PL 2-6S series BEC's to connect to any flight controller with DF13-6p connector.\u003c\/p\u003e\u003cp\u003eThis cable is for the PL 2-6S series BEC's to connect to any flight controller with DF13-6p connector. For example: Pixhawk 1, APM... etc. L = 150mm\u003c\/p\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63499802509661,"sku":"Mauch-041","price":5.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1602680003-63271500_3df1ea7f-0b7f-4657-bf2f-e72d45150d61.jpg?v=1772027982"},{"product_id":"mauch-043-pl-fc-cable-for-jst-gh-6pin","title":"Mauch 043 - PL - FC cable for JST-GH 6pin","description":"\u003cp\u003eThis cable is for the PL 2-6S series BEC's to connect to any flight controller with JST-GH 6p connector.\u003c\/p\u003e\u003cp\u003eThis cable is for the PL 2-6S series BEC's to connect to any flight controller with JST-GH 6p connector. For example: Drotek Pixhawk Pro, PixRacer... etc. L = 150mm\u003c\/p\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63499802575197,"sku":"Mauch-043","price":5.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1602680929-19691600_a4940464-c844-4b5e-ba93-f91c03f85df5.jpg?v=1772027983"},{"product_id":"mauch-050-pl-px2-1-back-up-cable","title":"Mauch 050 - PL - PX2.1 Back Up Cable","description":"\u003cp\u003e\u003cspan style=\"font-size: 14px; color: #000000;\"\u003eThis cable connects a PL BEC to the Power 2 input on the Pixhawk 2.1.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px; color: #000000;\"\u003eMolex CLIK-Mate 2.0mm 6p \/ L = 150mm\u003c\/span\u003e\u003c\/p\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63499881480541,"sku":"Mauch-050","price":5.57,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1647609684-60320700_f205c61b-12bc-4af6-b1ea-07b094d6e2a1.jpg?v=1772029585"},{"product_id":"mauch-005-pl-200-8-120v-sensor-board-with-enclosure-8awg","title":"Mauch 005 - PL-200\/8 120V Sensor Board with enclosure- 8AWG","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e200A - Current \/ Voltage measurement sensor board, based on Allegro Hall Sensor ACS770-250U\u003cspan style=\"color: rgba(18, 18, 18, 0.75); font-family: Assistant, sans-serif; letter-spacing: 0.6px;\"\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eVoltage range is up to 28S (120V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the manual page for more details.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eAll high voltage parts covert with solder-mask paint to reduce risk of contact.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eThis Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\u003cdiv\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eConnected to the sensor are 2x15cm 8AWG wire (red) as a standard.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eREM: The connector is Molex \/ Clik-Mate \/ 1.25mm \/ 4p (5023800400)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eWithout CFK enclosure = 27.5 x 19.5 x 10.5mm \/ 45g (with 2x 15cm 8AWG)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eWith CFK enclosure = 43.5 x 23.0 x 15mm \/ 50g (with 2x 15cm 8AWG)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eDelivery in PP box: 55 x 55 x 20mm \/ 60g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003ePackage contains: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x Mauch 005 PL-200\/8 120V Sensor Board with enclosure- 8AWG\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eThis package comes \u003cstrong\u003ewithout\u003c\/strong\u003e sensor cable (comes with the BEC's), \u003cstrong\u003ewith\u003c\/strong\u003e CFK enclosure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eNote: If you want to use your own BEC, then please order a sensor cable (040) and ensure that the supplied voltage is within 4.95-5.05V.\u003c\/span\u003e\u003c\/p\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63500135694685,"sku":"Mauch-005","price":50.71,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1750940532-98342000_e805b9bb-7128-4330-91b7-fe0103df65a4.jpg?v=1772030362"},{"product_id":"mauch-030-2x-200a-pdb-with-400a-main-switch-8awg-10awg","title":"Mauch 030 - 2x 200A PDB with 400A main switch 8AWG\/10AWG","description":"\u003cp bis_size='{\"x\":12,\"y\":9,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":271}'\u003e\u003cstrong bis_size='{\"x\":12,\"y\":10,\"w\":77,\"h\":17,\"abs_x\":500,\"abs_y\":272}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":10,\"w\":77,\"h\":17,\"abs_x\":500,\"abs_y\":272}'\u003eMauch 030\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":45,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":307}'\u003e\u003cspan style=\"font-size: 14px; color: #ff0000;\" bis_size='{\"x\":12,\"y\":46,\"w\":504,\"h\":17,\"abs_x\":500,\"abs_y\":308}'\u003e*Please select version required. Available with 8 AWG or 10 AWG input cables*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":80,\"w\":575,\"h\":97,\"abs_x\":500,\"abs_y\":342}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":81,\"w\":574,\"h\":95,\"abs_x\":500,\"abs_y\":343}'\u003e All-in-one PDB for Pixhawk 2.1 (The Cube) and any other flight controller via an adapter cable. With an integrated 2x200A hall sensor, Sensor Hub X2, 4-14S HYB-BEC, and most importantly a main power switch with a continuous current of 400A. The outputs are over 3.5mm banana connectors, plus spare BEC connectors after the switch and before the switch.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":194,\"w\":575,\"h\":58,\"abs_x\":500,\"abs_y\":456}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":195,\"w\":551,\"h\":56,\"abs_x\":500,\"abs_y\":457}'\u003eThis design lets you connect the main batteries to heat up the Cube and get GPS lock without powering up all the rest of the equipment. When ready, just press the power switch and fly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":269,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":531}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":270,\"w\":180,\"h\":17,\"abs_x\":500,\"abs_y\":532}'\u003eLess wiring = Cleaner builds\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":305,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":567}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":306,\"w\":493,\"h\":17,\"abs_x\":500,\"abs_y\":568}'\u003eProtect your ESC’s and other equipment due to smooth power-up from GND.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":340,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":602}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":341,\"w\":300,\"h\":17,\"abs_x\":500,\"abs_y\":603}'\u003eRecommended maximum AUW of UAV = 50kg.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":376,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":638}'\u003e \u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":411,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":673}'\u003e\u003cstrong bis_size='{\"x\":12,\"y\":412,\"w\":98,\"h\":17,\"abs_x\":500,\"abs_y\":674}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":412,\"w\":98,\"h\":17,\"abs_x\":500,\"abs_y\":674}'\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul bis_size='{\"x\":12,\"y\":447,\"w\":575,\"h\":117,\"abs_x\":500,\"abs_y\":709}'\u003e\n\u003cli bis_size='{\"x\":52,\"y\":447,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":709}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":448,\"w\":446,\"h\":17,\"abs_x\":540,\"abs_y\":710}'\u003eInput 2x 4-14S (absolute max.60V) with transient spikes of max. 65V.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli bis_size='{\"x\":52,\"y\":467,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":729}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":468,\"w\":340,\"h\":17,\"abs_x\":540,\"abs_y\":730}'\u003e2x 200A = 400A (continues) 1,200A @ 25’C for 1sec.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli bis_size='{\"x\":52,\"y\":486,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":748}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":487,\"w\":335,\"h\":17,\"abs_x\":540,\"abs_y\":749}'\u003eHub X2 can be deactivated for single battery usage.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli bis_size='{\"x\":52,\"y\":506,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":768}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":507,\"w\":278,\"h\":17,\"abs_x\":540,\"abs_y\":769}'\u003e5.3V \/ 3A power supply for Flight Controller\u003c\/span\u003e\u003c\/li\u003e\n\u003cli bis_size='{\"x\":52,\"y\":525,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":787}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":526,\"w\":332,\"h\":17,\"abs_x\":540,\"abs_y\":788}'\u003e2x 20cm input cables (red\/black) 10 AWG or 8 AWG\u003c\/span\u003e\u003c\/li\u003e\n\u003cli bis_size='{\"x\":52,\"y\":545,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":807}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":546,\"w\":297,\"h\":17,\"abs_x\":540,\"abs_y\":808}'\u003eOnly 75 x 49 x 27mm -\u0026gt; 110g (without cables)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp bis_size='{\"x\":12,\"y\":579,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":841}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":580,\"w\":3,\"h\":17,\"abs_x\":500,\"abs_y\":842}'\u003e \u003c\/span\u003e\u003cstrong bis_size='{\"x\":15,\"y\":580,\"w\":121,\"h\":17,\"abs_x\":503,\"abs_y\":842}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":15,\"y\":580,\"w\":121,\"h\":17,\"abs_x\":503,\"abs_y\":842}'\u003ePackage contains\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul bis_size='{\"x\":12,\"y\":614,\"w\":575,\"h\":97,\"abs_x\":500,\"abs_y\":876}'\u003e\n\u003cli bis_size='{\"x\":52,\"y\":614,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":876}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":615,\"w\":236,\"h\":17,\"abs_x\":540,\"abs_y\":877}'\u003e1x PDB with soldered-on input wires \u003c\/span\u003e\u003c\/li\u003e\n\u003cli bis_size='{\"x\":52,\"y\":634,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":896}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":635,\"w\":316,\"h\":17,\"abs_x\":540,\"abs_y\":897}'\u003e1x 042: PL – FC cable for Pixhawk 2.1 (The Cube)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli bis_size='{\"x\":52,\"y\":653,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":915}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":654,\"w\":233,\"h\":17,\"abs_x\":540,\"abs_y\":916}'\u003e20x 3.5mm bullet connectors (male)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli bis_size='{\"x\":52,\"y\":673,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":935}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":674,\"w\":219,\"h\":17,\"abs_x\":540,\"abs_y\":936}'\u003e2x 26cm Red\/Black shrinking tube\u003c\/span\u003e\u003c\/li\u003e\n\u003cli bis_size='{\"x\":52,\"y\":693,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":955}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":694,\"w\":218,\"h\":17,\"abs_x\":540,\"abs_y\":956}'\u003e2 pairs AMASS \/ AS150 connector\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp bis_size='{\"x\":12,\"y\":726,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":988}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":727,\"w\":3,\"h\":17,\"abs_x\":500,\"abs_y\":989}'\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":15,\"y\":727,\"w\":267,\"h\":17,\"abs_x\":503,\"abs_y\":989}'\u003eREM: Delivery without 059: Power-Switch\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":762,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":1024}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":763,\"w\":3,\"h\":17,\"abs_x\":500,\"abs_y\":1025}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv id=\"webs-bin-5bbeace1d8b6aa0001c72ce0\" bis_size='{\"x\":12,\"y\":797,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":1059}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":797,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":1059}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":797,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":1059}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":797,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":1059}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":798,\"w\":81,\"h\":17,\"abs_x\":500,\"abs_y\":1060}'\u003e\u003cstrong bis_size='{\"x\":12,\"y\":798,\"w\":81,\"h\":17,\"abs_x\":500,\"abs_y\":1060}'\u003eInstallation:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"webs-bin-5bbeacfdd8b6aa0001c72ce4\" bis_size='{\"x\":12,\"y\":817,\"w\":575,\"h\":389,\"abs_x\":500,\"abs_y\":1079}'\u003e\n\u003cp bis_size='{\"x\":12,\"y\":817,\"w\":575,\"h\":58,\"abs_x\":500,\"abs_y\":1079}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":818,\"w\":558,\"h\":56,\"abs_x\":500,\"abs_y\":1080}'\u003eThe PDB can be screwed to the vehicle’s frame. Removing the 4 bottom M3x12 screws and drill holes into the frame. Reinstall the screws though the frame. Exchange the screws to M3x15 (included) for frames thicker than 3mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":892,\"w\":575,\"h\":39,\"abs_x\":500,\"abs_y\":1154}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":893,\"w\":561,\"h\":36,\"abs_x\":500,\"abs_y\":1155}'\u003ePlease reserve approx. 15mm free space in front of the bullet connectors for the output cables.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":947,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":1209}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":948,\"w\":92,\"h\":17,\"abs_x\":500,\"abs_y\":1210}'\u003e \u003cstrong bis_size='{\"x\":15,\"y\":948,\"w\":88,\"h\":17,\"abs_x\":503,\"abs_y\":1210}'\u003eIMPORTANT:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":982,\"w\":575,\"h\":78,\"abs_x\":500,\"abs_y\":1244}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":983,\"w\":3,\"h\":17,\"abs_x\":500,\"abs_y\":1245}'\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":983,\"w\":571,\"h\":75,\"abs_x\":500,\"abs_y\":1245}'\u003eThe output connectors are 3.5mm bullet and the max. continues current per pin is 40A (50A spike). If you have any device which requires a higher current, then please consider to use multiple outputs in parallel, or solder a higher gauge wire directly into the female connector.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":1077,\"w\":575,\"h\":39,\"abs_x\":500,\"abs_y\":1339}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1078,\"w\":548,\"h\":36,\"abs_x\":500,\"abs_y\":1340}'\u003eIt is possible to solder up up 10AWG into the female connector and that increases the max. current per pin to 200A.-\u0026gt; With 12AWG it is 100A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":1132,\"w\":575,\"h\":39,\"abs_x\":500,\"abs_y\":1394}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1133,\"w\":540,\"h\":36,\"abs_x\":500,\"abs_y\":1395}'\u003eIf you have any high current device, then please use the outputs in the middle of the PDB to ensure an balanced current flow through the PDB.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":1187,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":1449}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1188,\"w\":3,\"h\":17,\"abs_x\":500,\"abs_y\":1450}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"webs-bin-5bbebfc4d8b6aa0001c72f86\" bis_size='{\"x\":12,\"y\":1223,\"w\":575,\"h\":376,\"abs_x\":500,\"abs_y\":1485}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1223,\"w\":575,\"h\":376,\"abs_x\":500,\"abs_y\":1485}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1223,\"w\":575,\"h\":376,\"abs_x\":500,\"abs_y\":1485}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1223,\"w\":575,\"h\":376,\"abs_x\":500,\"abs_y\":1485}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1223,\"w\":575,\"h\":200,\"abs_x\":500,\"abs_y\":1485}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1223,\"w\":575,\"h\":200,\"abs_x\":500,\"abs_y\":1485}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1223,\"w\":575,\"h\":200,\"abs_x\":500,\"abs_y\":1485}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1405,\"w\":300,\"h\":17,\"abs_x\":500,\"abs_y\":1667}'\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1423,\"w\":575,\"h\":176,\"abs_x\":500,\"abs_y\":1685}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1423,\"w\":575,\"h\":176,\"abs_x\":500,\"abs_y\":1685}'\u003e\n\u003cp bis_size='{\"x\":12,\"y\":1423,\"w\":575,\"h\":176,\"abs_x\":500,\"abs_y\":1685}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1424,\"w\":487,\"h\":17,\"abs_x\":500,\"abs_y\":1686}'\u003eSelect the correct voltage measurement range according your main battery.\u003c\/span\u003e\u003cbr bis_size='{\"x\":499,\"y\":1424,\"w\":0,\"h\":17,\"abs_x\":987,\"abs_y\":1686}'\u003e\u003cbr bis_size='{\"x\":12,\"y\":1444,\"w\":0,\"h\":17,\"abs_x\":500,\"abs_y\":1706}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1464,\"w\":266,\"h\":17,\"abs_x\":500,\"abs_y\":1726}'\u003eSolder bridge out = Up to 14S (max. 60V)\u003c\/span\u003e\u003cbr bis_size='{\"x\":278,\"y\":1464,\"w\":0,\"h\":17,\"abs_x\":766,\"abs_y\":1726}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1483,\"w\":446,\"h\":17,\"abs_x\":500,\"abs_y\":1745}'\u003ePlease use the voltage divider from the final test result (approx. 26.6)\u003c\/span\u003e\u003cbr bis_size='{\"x\":458,\"y\":1483,\"w\":0,\"h\":17,\"abs_x\":946,\"abs_y\":1745}'\u003e\u003cbr bis_size='{\"x\":12,\"y\":1503,\"w\":0,\"h\":17,\"abs_x\":500,\"abs_y\":1765}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1522,\"w\":256,\"h\":17,\"abs_x\":500,\"abs_y\":1784}'\u003eSolder bridge in   = Up to 7S (max. 33V)\u003c\/span\u003e\u003cbr bis_size='{\"x\":268,\"y\":1522,\"w\":0,\"h\":17,\"abs_x\":756,\"abs_y\":1784}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1542,\"w\":519,\"h\":56,\"abs_x\":500,\"abs_y\":1804}'\u003ePlease use an voltage divider of 10.0 -\u0026gt; The measurement will be quite accurate. However, you can measure the main battery voltage with an DVM and readjust if necessary.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"webs-bin-5bbec0f1d8b6aa0001c72fc4\" bis_size='{\"x\":12,\"y\":1616,\"w\":575,\"h\":337,\"abs_x\":500,\"abs_y\":1878}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1616,\"w\":575,\"h\":337,\"abs_x\":500,\"abs_y\":1878}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1616,\"w\":575,\"h\":337,\"abs_x\":500,\"abs_y\":1878}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1616,\"w\":575,\"h\":337,\"abs_x\":500,\"abs_y\":1878}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1616,\"w\":575,\"h\":200,\"abs_x\":500,\"abs_y\":1878}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1616,\"w\":575,\"h\":200,\"abs_x\":500,\"abs_y\":1878}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1616,\"w\":575,\"h\":200,\"abs_x\":500,\"abs_y\":1878}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1798,\"w\":300,\"h\":17,\"abs_x\":500,\"abs_y\":2060}'\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1816,\"w\":575,\"h\":137,\"abs_x\":500,\"abs_y\":2078}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1816,\"w\":575,\"h\":137,\"abs_x\":500,\"abs_y\":2078}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1816,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2078}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1817,\"w\":367,\"h\":17,\"abs_x\":500,\"abs_y\":2079}'\u003e1: Main input for hall sensor 1 (max.60V) 200A continues.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1836,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2098}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1837,\"w\":371,\"h\":17,\"abs_x\":500,\"abs_y\":2099}'\u003e2: Main input for hall sensor 2 (max.60V) 200A continues.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1856,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2118}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1857,\"w\":461,\"h\":17,\"abs_x\":500,\"abs_y\":2119}'\u003e3: External BEC directly connected to main battery without main switch.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1875,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2137}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1876,\"w\":469,\"h\":17,\"abs_x\":500,\"abs_y\":2138}'\u003e4: 9x output after main switch. For up to 8x ESC's plus one external BEC.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1895,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2157}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1896,\"w\":529,\"h\":17,\"abs_x\":500,\"abs_y\":2158}'\u003e5: Power Switch 059, or if not connected then dummy connector to deactivate X2.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1914,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2176}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1915,\"w\":245,\"h\":17,\"abs_x\":500,\"abs_y\":2177}'\u003e6: Sensor Hub X2 relays alarm output.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1934,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2196}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":1935,\"w\":440,\"h\":17,\"abs_x\":500,\"abs_y\":2197}'\u003e7: To flight controller (+\/+\/I\/U\/-\/-) with Molex Click-Mate 1.25mm \/ 6p\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"webs-bin-5bbeaed5d8b6aa0001c72d37\" bis_size='{\"x\":12,\"y\":1954,\"w\":575,\"h\":421,\"abs_x\":500,\"abs_y\":2216}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1954,\"w\":575,\"h\":200,\"abs_x\":500,\"abs_y\":2216}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1954,\"w\":575,\"h\":200,\"abs_x\":500,\"abs_y\":2216}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":1954,\"w\":575,\"h\":200,\"abs_x\":500,\"abs_y\":2216}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2136,\"w\":300,\"h\":17,\"abs_x\":500,\"abs_y\":2398}'\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":2154,\"w\":575,\"h\":220,\"abs_x\":500,\"abs_y\":2416}'\u003e\n\u003cp bis_size='{\"x\":12,\"y\":2154,\"w\":575,\"h\":78,\"abs_x\":500,\"abs_y\":2416}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2155,\"w\":568,\"h\":75,\"abs_x\":500,\"abs_y\":2417}'\u003eThe PDB is delivered without attached shrinking tube. Please select if you want to insulate the outputs with a small piece of it, or if you first want to insert the bullets and then cover the output incl. the bullet with one piece of shrinking tube. The included tube is dual wall adhesive shrinking tube.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":2248,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2510}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2249,\"w\":559,\"h\":17,\"abs_x\":500,\"abs_y\":2511}'\u003eFor safety reasons, please protect unused outputs with a small piece of shrinking tube.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":2284,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2546}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2285,\"w\":3,\"h\":17,\"abs_x\":500,\"abs_y\":2547}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":2320,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2582}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2321,\"w\":0,\"h\":17,\"abs_x\":500,\"abs_y\":2583}'\u003e\u003c\/span\u003e\u003cstrong bis_size='{\"x\":12,\"y\":2321,\"w\":77,\"h\":17,\"abs_x\":500,\"abs_y\":2583}'\u003e\u003cspan style=\"color: #ff0000; font-size: 14px;\" bis_size='{\"x\":12,\"y\":2321,\"w\":77,\"h\":17,\"abs_x\":500,\"abs_y\":2583}'\u003eImportant !\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":2355,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2617}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2356,\"w\":436,\"h\":17,\"abs_x\":500,\"abs_y\":2618}'\u003eThe top row is positive (red) and the bottom row is negative (black).\u003cbr bis_size='{\"x\":448,\"y\":2356,\"w\":0,\"h\":17,\"abs_x\":936,\"abs_y\":2618}'\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"webs-bin-5bbef6d8a05e2200016f3a7e\" bis_size='{\"x\":12,\"y\":2391,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2653}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":2391,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2653}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":2391,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2653}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":2391,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2653}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2392,\"w\":86,\"h\":17,\"abs_x\":500,\"abs_y\":2654}'\u003eStatus LED's:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"webs-bin-5bbef70ca05e2200016f3a86\" bis_size='{\"x\":12,\"y\":2410,\"w\":575,\"h\":496,\"abs_x\":500,\"abs_y\":2672}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":2410,\"w\":575,\"h\":496,\"abs_x\":500,\"abs_y\":2672}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":2410,\"w\":575,\"h\":496,\"abs_x\":500,\"abs_y\":2672}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":2410,\"w\":575,\"h\":496,\"abs_x\":500,\"abs_y\":2672}'\u003e\n\u003cp bis_size='{\"x\":12,\"y\":2410,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2672}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2411,\"w\":462,\"h\":17,\"abs_x\":500,\"abs_y\":2673}'\u003eDuring boot up the internal Sensor Hub X2 will perform an internal test: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":2446,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2708}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2447,\"w\":466,\"h\":17,\"abs_x\":500,\"abs_y\":2709}'\u003eRED -\u0026gt; Flashing RED -\u0026gt; If all OK, then GREEN for 1 second. (Both LED's)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":2482,\"w\":575,\"h\":39,\"abs_x\":500,\"abs_y\":2744}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2483,\"w\":556,\"h\":36,\"abs_x\":500,\"abs_y\":2745}'\u003eAfter that, the LED status is depend on the current flow and if the current of both main batteries is within acceptable tolerance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":2537,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2799}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2538,\"w\":3,\"h\":17,\"abs_x\":500,\"abs_y\":2800}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":2572,\"w\":575,\"h\":39,\"abs_x\":500,\"abs_y\":2834}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2573,\"w\":570,\"h\":36,\"abs_x\":500,\"abs_y\":2835}'\u003eFlashing GREEN (Both LED’s) -\u0026gt; The current flow is below 3-5A per sensor and the X2 is in standby.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":2628,\"w\":575,\"h\":39,\"abs_x\":500,\"abs_y\":2890}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2629,\"w\":548,\"h\":36,\"abs_x\":500,\"abs_y\":2891}'\u003eSolid GREEN (Both LED’s) -\u0026gt; The current flow is above 3-5A per sensor and the X2 is monitoring the main batteries.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":2683,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":2945}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2684,\"w\":3,\"h\":17,\"abs_x\":500,\"abs_y\":2946}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":2718,\"w\":575,\"h\":58,\"abs_x\":500,\"abs_y\":2980}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2719,\"w\":557,\"h\":56,\"abs_x\":500,\"abs_y\":2981}'\u003eIf either one of the two main batteries will reduce the supplied current by approx. 20%  than the other battery, then the LED of this sensor (S1 or S2) will change to solid RED and the alarm relay is on.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":2793,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":3055}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2794,\"w\":3,\"h\":17,\"abs_x\":500,\"abs_y\":3056}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp bis_size='{\"x\":12,\"y\":2829,\"w\":575,\"h\":78,\"abs_x\":500,\"abs_y\":3091}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2830,\"w\":573,\"h\":75,\"abs_x\":500,\"abs_y\":3092}'\u003eThe alarm can be canceled, by either rebooting the PDB\/Sensor Hub X2 (power cycle), or reduce the current flow to below 3-5A per sensor and wait 1 minute. -\u0026gt; If the Sensor Hub X2 is 1 minute in standby then he will reset any existing alarm and switches off the alarm relay.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"webs-bin-5bbef78fa05e2200016f3a9c\" bis_size='{\"x\":12,\"y\":2923,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":3185}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":2923,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":3185}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":2923,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":3185}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":2923,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":3185}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":2924,\"w\":281,\"h\":17,\"abs_x\":500,\"abs_y\":3186}'\u003eDeactivate Hub X2 for single battery usage:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"webs-bin-5bbef7c7a05e2200016f3aaf\" bis_size='{\"x\":12,\"y\":2943,\"w\":575,\"h\":376,\"abs_x\":500,\"abs_y\":3205}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":2943,\"w\":575,\"h\":376,\"abs_x\":500,\"abs_y\":3205}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":2943,\"w\":575,\"h\":376,\"abs_x\":500,\"abs_y\":3205}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":2943,\"w\":575,\"h\":376,\"abs_x\":500,\"abs_y\":3205}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":2943,\"w\":575,\"h\":200,\"abs_x\":500,\"abs_y\":3205}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":2943,\"w\":575,\"h\":200,\"abs_x\":500,\"abs_y\":3205}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":2943,\"w\":575,\"h\":200,\"abs_x\":500,\"abs_y\":3205}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":3125,\"w\":300,\"h\":17,\"abs_x\":500,\"abs_y\":3387}'\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":3143,\"w\":575,\"h\":176,\"abs_x\":500,\"abs_y\":3405}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":3143,\"w\":575,\"h\":176,\"abs_x\":500,\"abs_y\":3405}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":3143,\"w\":575,\"h\":58,\"abs_x\":500,\"abs_y\":3405}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":3144,\"w\":555,\"h\":56,\"abs_x\":500,\"abs_y\":3406}'\u003eIf you use the optional Power-Switch, then the Hub X2 can be deactivated by pressing the power switch for 3 seconds. Both LED's (S1\/S2) will change to solid red to indicate that the battery monitoring is deactivated. The alarm relays will not be activated.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":3202,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":3464}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":3203,\"w\":331,\"h\":17,\"abs_x\":500,\"abs_y\":3465}'\u003eA power cycle will reset the X2 to normal operation.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":3222,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":3484}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":3223,\"w\":3,\"h\":17,\"abs_x\":500,\"abs_y\":3485}'\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":3241,\"w\":575,\"h\":58,\"abs_x\":500,\"abs_y\":3503}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":3242,\"w\":563,\"h\":56,\"abs_x\":500,\"abs_y\":3504}'\u003eIf the Power-Switch isn't used, then please connect the dummy connector (see picture) into the switch output. This will deactivate the internal alarm and both LED's change to solid red.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":3300,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":3562}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":3301,\"w\":510,\"h\":17,\"abs_x\":500,\"abs_y\":3563}'\u003eThe Hub X2  will be always deactivated until you remove the dummy connector.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"webs-bin-5bbefccad8b6aa0001c736b9\" bis_size='{\"x\":12,\"y\":3320,\"w\":575,\"h\":58,\"abs_x\":500,\"abs_y\":3582}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":3320,\"w\":575,\"h\":58,\"abs_x\":500,\"abs_y\":3582}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":3320,\"w\":575,\"h\":58,\"abs_x\":500,\"abs_y\":3582}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":3320,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":3582}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":3321,\"w\":0,\"h\":17,\"abs_x\":500,\"abs_y\":3583}'\u003e\u003cbr bis_size='{\"x\":12,\"y\":3321,\"w\":0,\"h\":17,\"abs_x\":500,\"abs_y\":3583}'\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":3339,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":3601}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":3340,\"w\":158,\"h\":17,\"abs_x\":500,\"abs_y\":3602}'\u003eSetup in MissionPlanner:\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":3359,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":3621}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":3360,\"w\":0,\"h\":17,\"abs_x\":500,\"abs_y\":3622}'\u003e\u003cbr bis_size='{\"x\":12,\"y\":3360,\"w\":0,\"h\":17,\"abs_x\":500,\"abs_y\":3622}'\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"webs-bin-5bbefce6d8b6aa0001c736bb\" bis_size='{\"x\":12,\"y\":3378,\"w\":575,\"h\":39,\"abs_x\":500,\"abs_y\":3640}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":3378,\"w\":575,\"h\":39,\"abs_x\":500,\"abs_y\":3640}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":3378,\"w\":575,\"h\":39,\"abs_x\":500,\"abs_y\":3640}'\u003e\n\u003cdiv bis_size='{\"x\":12,\"y\":3378,\"w\":575,\"h\":39,\"abs_x\":500,\"abs_y\":3640}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":3379,\"w\":538,\"h\":36,\"abs_x\":500,\"abs_y\":3641}'\u003ePlease follow the procedure here: https:\/\/ardupilot.org\/copter\/docs\/common-mauch-power-modules.html \u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Mauch","offers":[{"title":"8 AWG Blue","offer_id":63500192645469,"sku":"Mauch 030 - 8 AWG","price":399.49,"currency_code":"GBP","in_stock":true},{"title":"10 AWG","offer_id":63500192678237,"sku":"Mauch 030 - 10 AWG","price":388.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1707835755-96966700_c61deddd-c732-4c60-ba41-bc742035875a.jpg?v=1772031177"},{"product_id":"mauch-031-pc-2x-200a-pdb-with-400a-main-switch-8awg-10awg","title":"Mauch 031 - PC 2x 200A PDB with 400A main switch 8AWG\/10AWG","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eMauch 031\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px; color: #ff0000;\"\u003e*Please select version required. Available with 8 AWG or 10 AWG input cables*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eAll-in-one PDB for Pixhawk 2.1 (The Cube) and any other flight controller via an adapter cable. With an integrated 2x200A hall sensor, Sensor Hub X2, 4-14S HYB-BEC, and most importantly a main power switch with a continuous current of 400A. The outputs are over 3.5mm banana connectors, plus spare BEC connectors after the switch and before the switch.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eThis design lets you connect the main batteries to heat up the Cube and get GPS lock without powering up all the rest of the equipment. When ready, just press the power switch and fly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eThis new PC Series PDB includes two fully redundant BEC’s with POWER1 and POWER2 for the FC. A higher output current of 2x 5A per BEC. Fully redundant power supply for the PDB control circuit... etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eLess wiring = Cleaner builds\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eProtect your ESC’s and other equipment due to smooth power-up from GND.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eInput 2x 4-14S (max.65V) with transient spikes of up to 85V.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e2x 200A = 400A (continues) 1,200A @ 25’C for 1sec.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eHub X2 can be deactivated for single battery usage.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e2x 5.3V \/ 5A power supply for Flight Controller\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e2x 20cm 8AWG input cables (red\/black)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eOnly 75 x 49 x 27mm -\u0026gt; 112g (without cables)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eRecommended maximum AUW of UAV = 50kg\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003ePackage contains\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x PDB with soldered-on input wires (2x 20cm 8 OR 10AWG, depends on selection)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x 060: Power-Cube \/ Pixhawk 2.1 cable (The Cube)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x 061: Power-Cube \/ Pixhawk 2.1 Backup cable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e20x 3.5mm bullet connectors (male)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e2x 26cm Red\/Black shrinking tube.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e2 pairs AMASS \/ AS150 connector\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003eREM: Delivery without 059: Power-Switch\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Mauch","offers":[{"title":"8 AWG Blue","offer_id":63500201197917,"sku":"Mauch 031 - 8 AWG","price":497.27,"currency_code":"GBP","in_stock":true},{"title":"10 AWG","offer_id":63500201230685,"sku":"Mauch 031 - 10 AWG","price":486.27,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1707839100-37217900_8c221d0b-9c91-435e-90ea-3f697b8dacff.jpg?v=1772031348"},{"product_id":"mauch-013-sensor-hub-x8","title":"Mauch 013 - Sensor Hub X8","description":"\u003cp bis_size='{\"x\":12,\"y\":9,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":271}'\u003e\u003cstrong bis_size='{\"x\":12,\"y\":10,\"w\":191,\"h\":17,\"abs_x\":500,\"abs_y\":272}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":10,\"w\":191,\"h\":17,\"abs_x\":500,\"abs_y\":272}'\u003eMauch 013 - Sensor Hub X8\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul bis_size='{\"x\":12,\"y\":45,\"w\":575,\"h\":117,\"abs_x\":500,\"abs_y\":307}'\u003e\n\u003cli bis_size='{\"x\":52,\"y\":45,\"w\":535,\"h\":39,\"abs_x\":540,\"abs_y\":307}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":46,\"w\":512,\"h\":36,\"abs_x\":540,\"abs_y\":308}'\u003eThe Sensor Hub X8, is able to collect the current of up to 8 current sensors and pass the summarized current to the FC.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli bis_size='{\"x\":52,\"y\":84,\"w\":535,\"h\":39,\"abs_x\":540,\"abs_y\":346}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":85,\"w\":515,\"h\":36,\"abs_x\":540,\"abs_y\":347}'\u003eThe Sensor Hub X8 is compatible with any PL-xxx sensor, but all sensors should be the same current range.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli bis_size='{\"x\":52,\"y\":123,\"w\":535,\"h\":39,\"abs_x\":540,\"abs_y\":385}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":124,\"w\":476,\"h\":36,\"abs_x\":540,\"abs_y\":386}'\u003eFor more detailed and latest information on the product please see Mauch website \u003ca href=\"https:\/\/mauch-electronic.com\/pl-sensor-hub-x8\" bis_size='{\"x\":105,\"y\":144,\"w\":28,\"h\":17,\"abs_x\":593,\"abs_y\":406}'\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp bis_size='{\"x\":12,\"y\":176,\"w\":575,\"h\":19,\"abs_x\":500,\"abs_y\":438}'\u003e\u003cstrong bis_size='{\"x\":12,\"y\":177,\"w\":125,\"h\":17,\"abs_x\":500,\"abs_y\":439}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":12,\"y\":177,\"w\":125,\"h\":17,\"abs_x\":500,\"abs_y\":439}'\u003ePackage contains:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul bis_size='{\"x\":12,\"y\":212,\"w\":575,\"h\":78,\"abs_x\":500,\"abs_y\":474}'\u003e\n\u003cli bis_size='{\"x\":52,\"y\":212,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":474}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":213,\"w\":114,\"h\":17,\"abs_x\":540,\"abs_y\":475}'\u003e1x Sensor Hub X8\u003c\/span\u003e\u003c\/li\u003e\n\u003cli bis_size='{\"x\":52,\"y\":231,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":493}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":232,\"w\":526,\"h\":17,\"abs_x\":540,\"abs_y\":494}'\u003e1x Connection cable to current sensor PL-xxx \/ L = 200mm -\u0026gt; With voltage sense.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli bis_size='{\"x\":52,\"y\":251,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":513}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":252,\"w\":481,\"h\":17,\"abs_x\":540,\"abs_y\":514}'\u003e7x Connection cable to current sensor PL-xxx \/ L = 200mm -\u0026gt; Only current\u003c\/span\u003e\u003c\/li\u003e\n\u003cli bis_size='{\"x\":52,\"y\":271,\"w\":535,\"h\":19,\"abs_x\":540,\"abs_y\":533}'\u003e\u003cspan style=\"font-size: 14px;\" bis_size='{\"x\":52,\"y\":272,\"w\":383,\"h\":17,\"abs_x\":540,\"abs_y\":534}'\u003e1x Alarm output cable and external Reset \/ Restart \/ L = 200\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63500308808029,"sku":"Mauch-013","price":173.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1602672319-17816900_000e2a55-a4ba-4a4a-901e-0ce847c093ef.jpg?v=1772032819"},{"product_id":"mauch-021-pl-4-14s-hyb-bec-1x-5-3v","title":"Mauch 021 – PL 4-14S HYB-BEC - 1x 5.3V","description":"\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003ePremium-Line 4-14s BEC with 1 x 5.35V\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eInput 4-14S LiPo \/ max. 60V.\u003c\/strong\u003e\u003c\/span\u003e Output 5.30V \/ 3A -\u0026gt; +\/- 0.05V –\u0026gt; Ripple 1mV @ 1.5A output current. Inclusive LDO power supply (+5.00V +\/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2\/X8 and output connector with Molex Clik-Mate 4p. Blue power \"ON' LED. 59mm x 29mm x 13mm \/ 26g with enclosure(without cables) Delivery in PP box: 55 x 55 x 20mm \u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x 021: PL 4-14S HYB-BEC \/ 1x 5.3V \/ 3A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x 040: PL - Series sensor cable \/ L=150mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x Enclosure\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eREM: The BEC is delivered without an flight controller cable, so please select the correct cable to match your FC: 041: DF13-6p -\u0026gt; Pixhawk 1 \/ APM... etc. 042: Molex Clik-Mate 2.0 - 6p -\u0026gt; Pixhawk 2.1 043: JST-GH-6p -\u0026gt; Pixhawk 3... etc\u003c\/span\u003e\u003c\/p\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63500308971869,"sku":"Mauch-021","price":64.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1602690976-72223700_48bf99be-55d7-409c-a21d-e578bf4c6314.jpg?v=1772032819"},{"product_id":"mauch-022-pl-4-14s-hyb-bec-2-x-5-3v","title":"Mauch 022 – PL 4-14S HYB-BEC - 2 x 5.3V","description":"\u003cp\u003ePremium-Line 4-14s BEC with 2 x 5.35V\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eInput 4-14S LiPo \/ max. 60V.\u003c\/strong\u003e\u003c\/span\u003e Output 2x 5.30V \/ 3A -\u0026gt; +\/- 0.05V –\u0026gt; Ripple 1mV @ 1.5A output current. Inclusive LDO power supply (+5.00V +\/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2\/X8 and output connector with Molex Clik-Mate 4p. Blue power \"ON' LED. 59mm x 48mm x 13mm \/ 41g with enclosure(without cables) \u003cstrong\u003eDelivery in PP box:\u003c\/strong\u003e Scope of delivery: 1x 021: PL 4-14S HYB-BEC \/ 1x 5.3V \/ 3A 1x 040: PL - Series sensor cable \/ L=150mm 1x 050: Backup cable for Pixhawk 2.1 \/ L=150mm 1x Enclosure REM: The BEC is delivered without an flight controller cable, so please select the correct cable to match your FC: 041: DF13-6p -\u0026gt; Pixhawk 1 \/ APM... etc. 042: Molex Clik-Mate 2.0 - 6p -\u0026gt; Pixhawk 2.1 043: JST-GH-6p -\u0026gt; Pixhawk 3... etc\u003c\/p\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63500309070173,"sku":"Mauch-022","price":109.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1602691086-89498800_783072df-548f-49fb-a414-2c64430f9562.jpg?v=1772032829"},{"product_id":"mauch-023-pl-4-14s-hyb-bec-2-x-5-3v-amp-1-x-5-0v","title":"Mauch 023 – PL 4-14S HYB-BEC - 2 x 5.3V \u0026amp; 1 x 5.0V","description":"\u003cp\u003ePremium-Line 4-14s BEC with 2 x 5.35V \u0026amp; 1 x 5.0V\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eInput 4-14S LiPo \/ max. 60V.\u003c\/strong\u003e\u003c\/span\u003e Output 2x 5.30V \/ 1x 5.0V \/ 3A -\u0026gt; +\/- 0.05V –\u0026gt; Ripple 1mV @ 1.5A output current. Inclusive LDO power supply (+5.00V +\/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2\/X8 and output conector with Molex Clik-Mate 4p. Blue power \"ON' LED. 59mm x 66mm x 13mm \/ 57g with enclosure(without cables) Delivery in PP box: \u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x 021: PL 4-14S HYB-BEC \/ 1x 5.3V \/ 3A\u003c\/li\u003e\n\u003cli\u003e1x 040: PL - Series sensor cable \/ L=150mm\u003c\/li\u003e\n\u003cli\u003e1x 050: Backup cable for Pixhawk 2.1 \/ L=150mm\u003c\/li\u003e\n\u003cli\u003e1x 5.0V output cable (red\/black) one site Molex Clik-Mate 1.25mm-6p, the other site open. \/ L = 150mm\u003c\/li\u003e\n\u003cli\u003e1x Enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eREM: The BEC is delivered without an flight controller cable, so please selct the correct cable to match your FC: 041: DF13-6p -\u0026gt; Pixhawk 1 \/ APM... etc. 042: Molex Clik-Mate 2.0 - 6p -\u0026gt; Pixhawk 2.1 043: JST-GH-6p -\u0026gt; Pixhawk 3... etc\u003c\/p\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63500309201245,"sku":"Mauch-023","price":155.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1602763586-11880500_05629ef2-509e-4d9f-9d19-79391503894c.jpg?v=1772032827"},{"product_id":"mauch-024-pl-4-14s-hyb-bec-2-x-5-3v-amp-1-x-12-0v","title":"Mauch 024 – PL 4-14S HYB-BEC - 2 x 5.3V \u0026amp; 1 x 12.0V","description":"\u003cp\u003ePremium-Line 4-14s BEC with 2 x 5.35V \u0026amp; 1 x 12.0V\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eInput 4-14S LiPo \/ max. 60V.\u003c\/strong\u003e\u003c\/span\u003e Output 2x 5.30V \/ 1x 12.0V \/ 3A -\u0026gt; +\/- 0.05V –\u0026gt; Ripple 1mV @ 1.5A output current. Inclusive LDO power supply (+5.00V +\/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2\/X8 and output connector with Molex Clik-Mate 4p. Blue power \"ON' LED. 59mm x 66mm x 13mm \/ 57g with enclosure(without cables) Delivery in PP box: \u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x 021: PL 4-14S HYB-BEC \/ 1x 5.3V \/ 3A\u003c\/li\u003e\n\u003cli\u003e1x 040: PL - Series sensor cable \/ L=150mm\u003c\/li\u003e\n\u003cli\u003e1x 050: Backup cable for Pixhawk 2.1 \/ L=150mm\u003c\/li\u003e\n\u003cli\u003e1x 5.0V output cable (white\/black) one site Molex Clik-Mate 1.25mm-6p, the other site open. \/ L = 150mm\u003c\/li\u003e\n\u003cli\u003e1x Enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eREM: The BEC is delivered without an flight controller cable, so please select the correct cable to match your FC: 041: DF13-6p -\u0026gt; Pixhawk 1 \/ APM... etc. 042: Molex Clik-Mate 2.0 - 6p -\u0026gt; Pixhawk 2.1 043: JST-GH-6p -\u0026gt; Pixhawk 3... etc\u003c\/p\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63500309234013,"sku":"Mauch-024","price":155.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1602763826-11640800_6d40818c-3d78-4cb4-bfeb-afd09b5a5f39.jpg?v=1772032827"},{"product_id":"mauch-025-pl-4-14s-hyb-bec-2-x-5-3v-1-x-5-0v-amp-1-x-12-0v","title":"Mauch 025 – PL 4-14S HYB-BEC - 2 x 5.3V 1 x 5.0V \u0026amp; 1 x 12.0V","description":"\u003cp\u003ePremium-Line 4-14s BEC with 2 x 5.35V \u0026amp; 1 x 5.0V \u0026amp; 1 x 12.0V\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eInput 4-14S LiPo \/ max. 60V.\u003c\/strong\u003e\u003c\/span\u003e Output 2x 5.30V \/ 1x 5.0V \/ 1x 12.0V \/ 3A -\u0026gt; +\/- 0.05V –\u0026gt; Ripple 1mV @ 1.5A output current. Inclusive LDO power supply (+5.00V +\/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2\/X8 and output conector with Molex Clik-Mate 4p. Blue power \"ON' LED. 59mm x 87mm x 13mm \/ 72g with enclosure(without cables) Delivery in PP box: \u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x 021: PL 4-14S HYB-BEC \/ 1x 5.3V \/ 3A\u003c\/li\u003e\n\u003cli\u003e1x 040: PL - Series sensor cable \/ L=150mm\u003c\/li\u003e\n\u003cli\u003e1x 050: Backup cable for Pixhawk 2.1 \/ L=150mm\u003c\/li\u003e\n\u003cli\u003e1x 5.0V output cable (red\/black) one site Molex Clik-Mate 1.25mm-6p, the other site open. \/ L = 150mm\u003c\/li\u003e\n\u003cli\u003e1x 12.0V output cable (white\/black) one site Molex Clik-Mate 1.25mm-4p, the other site open. \/ L = 150mm\u003c\/li\u003e\n\u003cli\u003e1x Enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eREM: The BEC is delivered without an flight controller cable, so please selct the correct cable to match your FC: 041: DF13-6p -\u0026gt; Pixhawk 1 \/ APM... etc. 042: Molex Clik-Mate 2.0 - 6p -\u0026gt; Pixhawk 2.1 043: JST-GH-6p -\u0026gt; Pixhawk 3... etc\u003c\/p\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63500309496157,"sku":"Mauch-025","price":200.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1602764010-10898400_97c9487e-81c6-4bf2-873a-19ca16bda49c.jpg?v=1772032828"},{"product_id":"mauch-018-pl-4-6s-bec-3-x-5-35v-with-cfk-enclosure-special","title":"Mauch 018 – PL-4-6s BEC 3 x 5.35V with CFK enclosure (Special)","description":"\u003cp\u003ePremium-Line 4-6s BEC with 3 x 5.35V outputs *\u003cstrong\u003eThis version has all 5.3v outputs*\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eInput 4-6S LiPo \/ max. 28V.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOutput 3x 5.35V \/ 3A   +\/- 0.05V –\u0026gt; Ripple 10mV (0.2%) at 1.5A output current.\u003c\/p\u003e\n\u003cp\u003eInclusive LDO power supply (+5.00V +\/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output connector with Molex Clik-Mate 4p.\u003c\/p\u003e\n\u003cp\u003eInput wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes.\u003c\/p\u003e\n\u003cp\u003eBlue power \"ON' LED. (3x)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32mm x 50mm x 7mm \/ 19g without CFK enclosure\u003c\/li\u003e\n\u003cli\u003e34mm x 52mm x 10mm \/ 24g with CFK enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x PL-4-6S BEC 3x\u003c\/li\u003e\n\u003cli\u003e1x CFK enclosure\u003c\/li\u003e\n\u003cli\u003e1x Sensor cable (040) Molex Clik-Mate 4p \/ L = 150mm\u003c\/li\u003e\n\u003cli\u003e1x Backup cable (050) for Pixhawk 2.1 \/ Molex Clik-Mate 2.0-6p \/ L = 150mm\u003c\/li\u003e\n\u003cli\u003e1x 5.0V output cable one site Molex Clik-Mate 1.25mm-4p, the othersite open. \/ L = 150mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eREM: The BEC is delivered without an flight controller cable, so please selct the correct cable to match your FC:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e041: DF13-6p -\u0026gt; Pixhawk 1 \/ APM... etc.\u003c\/li\u003e\n\u003cli\u003e042: Molex Clik-Mate 2.0 - 6p -\u0026gt; Pixhawk 2.1\u003c\/li\u003e\n\u003cli\u003e043: JST-GH-6p -\u0026gt; Pixhawk 3... etc\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mauch","offers":[{"title":"Default Title","offer_id":63500345114973,"sku":"Mauch-018","price":81.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1651586871-84732800_f92d2c1b-3661-4c84-bcda-42183202cbad.jpg?v=1772033280"}],"url":"https:\/\/www.3dxr.co.uk\/collections\/pl-premium-line-mauch-electronics.oembed","provider":"3DXR","version":"1.0","type":"link"}