{"title":"Matek Systems GPS \/ GNSS","description":"","products":[{"product_id":"matek-systems-ap-periph-can-node-l431","title":"Matek Systems- AP_PERIPH CAN Node L431","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eMatek Systems- AP_PERIPH CAN Node L431\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/62443a262d648671CAN-L431_w.jpg\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eCAN-L431 is an Adapter Node based on ArudPilot AP_Periph firmware.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eWith this board, you can easily utilize the ArduPilot driver library to convert ArduPilot supported GNSS, Compass, Barometer,Airspeed sensor, and GPIO based (PWM, Buzzer\/LED notify) peripherals to DroneCAN bus peripherals.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eMCU: STM32L431xC, 256KB Flash\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eCAN transceiver data rates up to 5 Mbit\/s in the CAN FD fast phase\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x CAN, DroneCAN Protocol  (2x GH-4P connectors in parallel)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003e3x UARTs\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUART1, spare\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUART2, MSP default, DFU\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUART3, GPS default\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x I2C\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003efor peripheral Airspeed sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003efor peripheral Barometer\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x SPI\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003efor peripheral RM3100\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003e4x ADC\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eBATT_VOLT, PIN 5\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eBATT_CURR, PIN 6\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eBATT2_VOLT, PIN 15\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eBATT2_CURR, PIN 16\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e5x PWM outputs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x GPIO with TIM16 for buzzer\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eST debug, SWCLK \u0026amp; SWDIO\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eLED\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eBlue, Fast blinking,  Booting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eBlue, Slow blinking, working\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eRed, 3.3V indicator\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eInput voltage range: 4.5~5.5V  @5V pad\/pin\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003ePower consumption: 40mA\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eOperating Temperatures: -20~80 °C\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003ePhysical\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e2x JST-GH-4P(SM04B-GHS-TB) for CAN\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x JST-GH-4P(SM04B-GHS-TB) for I2C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x JST-GH-6P(SM06B-GHS-TB) for UART3+I2C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eBoard Size: 26mm*26mm*6mm.  3.7g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eFirmware\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eArduPilot AP_Periph  MatekL431-Periph, or MatekL431-Airspeed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUpdate via DroneCAN GUI Tool\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003ePackage includes\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x CAN-L431 board\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x JST-GH-4P to JST-GH-4P 20cm silicon wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x JST-GH-6P to JST-GH-6P 20cm silicon wire\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":63500126421341,"sku":"MTS-01-04-CAN-Node-L431","price":16.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1648638556-76489600_20a9f1a9-de0a-4475-b304-3ba546a6c516.jpg?v=1772029729"},{"product_id":"matek-systems-ap-periph-can-l4-pwm","title":"Matek Systems- AP_PERIPH, CAN-L4-PWM","description":"\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003eParameters in Flight controller\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eCAN_D1_PROTOCOL = 1\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eCAN_P1_DRIVER = 1\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eCAN_D1_UC_ESC_OF = 4   (Plane 4.2.1 or newer)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eCAN_D1_UC_ESC_BM = x\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eCAN_D1_UC_SRV_BM = x\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eBRD_SAFETYENABLE = 0 (if your flight controller doesn’t have safety pin)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/62ecf98d5fe21328CAN-L4-PWM_spec.jpg\" alt=\"\" width=\"1613\" height=\"969\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eCAN-L4-PWM is an Adapter Node based on ArudPilot AP_Periph firmware.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eUsing this adapter to turn DShot capable ESCs into CAN ESCs, including full ESC telemetry.  and turn PWM servos into CAN servos.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eMCU: STM32L431xC, 256KB Flash\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x CAN, DroneCAN Protocol\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e 9x PWM outputs (8x Dshot)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e1.5x UARTs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eUART1, RX1\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eUART3, Tx3\/ Rx3\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eST debug, SWCLK \u0026amp; SWDIO\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003eLED\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eBlue, Fast blinking,  Booting\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eBlue, Slow blinking, working\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eRed, 3.3V indicator\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eInput voltage range: 4.5~5.5V  @5V pad\/pin\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003ePower consumption: 30mA\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eOperating Temperatures: -20~80 °C\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e“Vx” pads are for powering servos via external BEC.  “Vx” is not connected to other components on this board.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e“Rx1” pads are for ESC Telemetry, DO NOT connect ESC BEC output to Rx1 pad.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003cstrong style=\"font-size: 14px;\"\u003ePhysical\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x JST-GH-4P(SM04B-GHS-TB) for CAN\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eBoard Size: 32mm*25.4mm.  3.5g\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eMounting: 20mm. Dia.3mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e3D file : CAN-L4-PWM_STEP.zip\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003eFirmware\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eArduPilot AP_Periph  MatekL431-Dshot\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eUpdate via DroneCAN GUI Tool\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 14px;\"\u003eIncludes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x CAN-L4-PWM board\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x JST-GH-4P to JST-GH-4P 20cm silicon wire\u003c\/span\u003e\u003c\/p\u003e","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":63500145951069,"sku":"MTS-06-05-CAN-L4-PWM","price":16.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1659697636-56943900_8e4b975f-134c-4989-9211-cb59c066af81.jpg?v=1772030527"},{"product_id":"matek-systems-gnss-compass-m10q-5883","title":"Matek Systems - GNSS \u0026 COMPASS, M10Q-5883","description":"\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003eM10Q-5883\u003c\/strong\u003e uses multi-constellation GNSS module powered by u-blox M10 series.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eThe GNSS module features the u-blox M10 standard precision GNSS platform and provides exceptional sensitivity and acquisition time for all L1 GNSS signals. It supports concurrent reception of four GNSS (GPS, GLONASS, Galileo, and BeiDou). The high number of visible satellites enables the receiver to select the best signals. This maximizes the position availability, in particular under challenging conditions such as in deep urban canyons. u-blox Super-S (Super-Signal) technology offers great RF sensitivity and can improve the dynamic position accuracy in non-line-of-sight scenarios.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eThe high-gain 15 x 15 mm2 patch antenna provides the best balance between performance and small size. The omnidirectional antenna radiation pattern increases flexibility for device installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003ePackage Includes\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"box-sizing: border-box; margin: 0px 0px 0px 1em; padding: 3px 0px; border: 0px #e1e1e1; font: inherit; vertical-align: baseline;\"\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x M10Q-5883\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"box-sizing: border-box; margin: 0px 0px 0px 1em; padding: 3px 0px; border: 0px #e1e1e1; font: inherit; vertical-align: baseline;\"\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x JST-GH-6P to JST-GH-6P 20cm silicon wire\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eGNSS u-blox M10 series (GPS, GLONASS, Galileo and BeiDou)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eMagnetic Compass QMC5883L\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003ePatch antenna 15*15*4mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eInput voltage range: 4~9V (5V pad\/pin)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003ePower consumption: 13mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUART baudrate: 9600 default\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eOperating Temperatures: -20~80 °C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUART(TX, RX) interface for GNSS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eI2C(DA, CL) interface for Compass QMC5883L\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eJST-GH-6P connector (SM06B-GHS-TB). 1.27mm pitch\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eGNSS PPS LED, Green. (Solid ON after powering on,  blinking(1Hz) when GNSS get 3D fix)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eProtocol: UBX(u-blox)  5Hz@GPS+GAL+BDS B1C+GLO or NMEA 1Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e20mm*20mm*12.4mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e8g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003ca href=\"http:\/\/www.mateksys.com\/Downloads\/other\/M10Q-5883_step.zip\"\u003eM10Q-5883_step.zip\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003cstrong\u003eWiring and settings\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eM10Q-5883  5V to Flight controller 4~9V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eM10Q-5883  RX to Flight controller UART_TX\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eM10Q-5883  TX to Flight controller UART_RX\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eM10Q-5883  CL to Flight controller I2C_SCL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eM10Q-5883  DA to Flight controller I2C_SDA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eM10Q-5883  G  to Flight controller GND\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eTips and Notes\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eCompass Alignment(flat mounting): Tilting the magnetometer is strongly discouraged !\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eINAV\/BetaFLight: compass Arrow forward, set CW 270° Flip when flight controller arrow is facing forward.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eINAV\/BetaFLight: compass Arrow backward, set CW 90° Flip when flight controller arrow is facing forward.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eArdupilot\/Mission Planner: Rotation None.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cspan style=\"font-size: 14px;\"\u003eMake sure to have compass\/magnetometer 10cm away from power lines\/ESC\/motors\/iron based material\u003c\/span\u003e\u003c\/p\u003e","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":63500173050205,"sku":"MTS-05-04-M10Q-5883","price":37.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1693492470-41903300_7e6d3ca1-7c77-4b6d-825a-af885cab20f4.jpg?v=1772030942"},{"product_id":"matek-systems-ultra-precise-i2c-power-monitor","title":"Matek Systems - Ultra Precise I2C Power Monitor","description":"\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eIntroducing the \u003cstrong\u003eMATEKSYS Ultra Precise I2C Power Monitor\u003c\/strong\u003e - INA-BM, powered by the acclaimed TI INA228 chip for unmatched accuracy and reliability in digital power monitoring. With a typical resistance of 200 μΩ, it minimizes power loss and supports up to three units in parallel for comprehensive monitoring. Enjoy hassle-free operation with no calibration needed and seamless compatibility with ArduPilot firmware for precise current and bus voltage readouts. Designed by MATEKSYS, the INA-BM guarantees unmatched performance and versatility across various applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUltra-Precise Digital Power Monitoring\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eNo Calibration Required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eVersatile Applications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eRobust Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eParallel Connectivity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eCompact Design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eLow Power Loss\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eCompatibility\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eSpecification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eLoad Current on Current Sensing Resistor: 150A (Continuous), 204.8A (Burst)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003ePower Supply for I2C-INA-BM Board: 4~9V @5V pad\/pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUltra-Precise Power Monitor: INA228 85-V, 20-Bit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eOperating Temperatures: -40~125 °C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eBattery Voltage Sense Input: 0~85V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eCurrent Sense Range: 0~204.8A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003ePower Consumption: 1mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e3.3V Indicator: LED Red\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eVoltage Accuracy: ±0.1%\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eCurrent Accuracy: ±2%\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eInterface: I2C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eParameters\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003ePackage contains:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x MATEKSYS Ultra Precise 12C Power Monitor - INA-BM \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x JST-GH-4P to JST-GH-4P 20cm silicone wire\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/6632657f6a98f87112C-INA-BM_Body_Image_01.jpg\" alt=\"\" width=\"940\" height=\"1562\"\u003e \u003c\/div\u003e","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":63500212633949,"sku":"MTS-02-02-Ultra-Precise-12C-Power-Monitor-I2C-INA-BM","price":10.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1714578872-67764300_1e090744-7c8a-4428-95b5-1fce62893d79.jpg?v=1772031483"},{"product_id":"matek-systems-ap-periph-can-node-can-g474","title":"Matek Systems- AP_PERIPH CAN Node CAN-G474","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eMatek Systems- AP_PERIPH CAN Node CAN-G474\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eIntroducing the CAN-G474, the ultimate adapter node for enthusiasts and professionals. Embedded with the cutting-edge ArduPilot AP_Periph firmware, this board stands as a robust cornerstone in building or upgrading your drone’s functionality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eTechnical Marvel for Enhanced Drone Operations\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eAt the heart of CAN-G474 lies the powerful STM32G474CE microcontroller, equipped with 512KB of flash memory, ensuring swift and reliable processing capabilities. This adapter node isn’t just smart, it’s fast. With a CAN transceiver boasting data rates up to 5Mbit\/s and the capability to support CANFD, high-speed communication within your UAV system is a breeze.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 14px;\"\u003eDual CAN Bus System:\u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003eManage complex setups with ease.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 14px;\"\u003eFour UARTs \u0026amp; Two I2C Buses:\u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003eConnect a wide array of peripherals including GNSS, rangefinders, and more.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 14px;\"\u003eSingle SPI Interface:\u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003eDesigned specifically for peripherals like the RM3100, with dedicated SPI pads located on the underside for a clean, efficient setup.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 14px;\"\u003eEleven PWM Outputs:\u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003eWhether it’s servos or ESCs, all PWMs support DMA\/DShot for precision control.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eOptimized for ArduPilot Software\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eLeverage the ArduPilot driver library seamlessly. The CAN-G474 transforms supported peripherals — from GNSS and compasses to electronic fuel injectors — into DroneCAN bus peripherals. This makes integrating multiple devices into your drone ecosystem as simple as plug-and-play.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eBuilt Tough for Unrelenting Performance\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eDesigned to perform in the most demanding environments, the CAN-G474 operates within a temperature range of -30 to 85 °C. It’s not just tough, it’s compact and lightweight too, making it an ideal choice for any drone build.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eDimensions and Mounting:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 14px;\"\u003eBoard Size:\u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003e36mm x 36mm x 6mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 14px;\"\u003eWeight:\u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003e5.2 grams\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 14px;\"\u003eStandard Mounting:\u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003e30.5mm square with M3 mounting holes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eFirmware Flexibility\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 14px;\"\u003ePreloaded with ArduPilot Firmware:\u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003eChoose between MatekG474-Periph for peripheral sensors and MatekG474-DShot for PWM outputs.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 14px;\"\u003eEasily Updated:\u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003eUse the DroneCAN GUI Tool or Mission Planner for firmware updates, or the STM32CubeProgrammer for updates in DFU mode.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eSimple Yet Sophisticated Indicator System:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 14px;\"\u003eBlue LED:\u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003eIndicates booting and communication status.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 14px;\"\u003eRed LED:\u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 14px;\"\u003eServes as a 3.3V power indicator.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003ePackage contains: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x CAN-G474 board\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e2x JST-GH-4P 20cm silicon wires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x JST-GH-6P 20cm silicon wire\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/66754e5d8e8f8598CAN-Node_CAN-G474_Body_Image_01.jpg\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":63500233507165,"sku":"MTS-03-10-CAN-Node-CAN-G474","price":16.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1718964096-41766400_e5a89566-0cc2-4911-ab42-320f7a32b0d8.jpg?v=1772031735"},{"product_id":"matek-systems-gnss-compass-m9n-5883","title":"Matek Systems - GNSS \u0026Compass M9N-5883","description":"\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eThe Matek \u003cstrong\u003eM9N-5883\u003c\/strong\u003e is multi-constellation GPS module with integrated compass (QMC5883L). The GPS is the u-blox NEO-M9N which supports simultaneous reception of four GNSS (GPS, GLONASS, Galileo, Beidou). It offers exceptional sensitivity and acquisition time for all GNSS L1 signals. Its built-in patch antenna provides the best balance between performance and small size. It offers great RF sensitivity and can improve the dynamic position accuracy even in non-line-of-sight scenarios.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eHigh-Performance GNSS Module\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003e:\u003c\/strong\u003e Equipped with the u-Blox NEO-M9N that supports concurrent reception from four major GNSS constellations.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eIntegrated Magnetic Compass\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 14px;\"\u003e: Includes a QMC5883L compass, enhancing orientation accuracy.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eCompact and Efficient\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 14px;\"\u003e: With dimensions of just 32mm x 32mm x 10mm and weighing only 14.5 grams, this GPS module is both lightweight and space-efficient, making it perfect for a wide range of applications.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eEnhanced Connectivity\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003e:\u003c\/strong\u003e Features UART and I2C interfaces for seamless integration with most flight controllers.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eDurable Design\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 14px;\"\u003e: Built to perform in a variety of environments with an operational temperature range of -20°C to 80°C.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eVisual Indicators\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 14px;\"\u003e: Includes a 3.3V power LED and a GNSS PPS LED, which blinks green when a 3D fix is established\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eSpecification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eGNSS u-Blox NEO-M9N (GPS, GLONASS, Galileo, and BeiDou)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eMagnetic Compass QMC5883L\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003ePatch antenna 25*25*4mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eInput voltage range: 4~6V (5V pad\/pin)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003ePower consumption: 50mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUART baud rate: 38400 default\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eOperating Temperatures: -20~80 °C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUART(TX, RX) interface for GNSS NEO-M9N\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eI2C(DA, CL) interface for Compass QMC5883L\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eJST-GH-6P connector\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e3.3V Power LED, Red\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eGNSS PPS LED, Green, blinking(1Hz) when GNSS has 3D fixed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e32mm*32mm*10mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e14.5g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003ePackage contains: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1 x M9N-5883\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1 x JST-GH-6P to JST-GH-6P 20cm silicon wire\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/6679674e5cf6d561M9N-5883_Body_Image_01.jpg\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":63500233998685,"sku":"MTS-03-12-GNSS\u0026Compass-M9N-5883","price":42.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1719232501-08475500_c2107a81-bc27-4ac4-b4ad-446d591f5c35.jpg?v=1772031745"},{"product_id":"matek-systems-gnss-m9n-g4-3100","title":"Matek Systems - GNSS M9N-G4-3100","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eM9N-G4-3100 is based on ArudPilots’ AP_Periph firmware,  It is a GNSS+COMPASS peripheral with CAN\/DroneCAN and UART\/MSP interfaces.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eM9N-G4-3100 uses multi-constellation GNSS powered by M9 series , It is a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eM9N-G4-3100 integrates an industrial-grade compass PNI RM3100 which provides high resolution, low power consumption, no hysteresis, large dynamic range, and high sampling rates.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eG474 CAN node is compatible with CAN FD(5 Mbps) \u0026amp; CAN 2.0 (1 Mbps)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eSpecification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eGNSS M9N series (GPS, GLONASS, Galileo and BeiDou\u003cspan data-slate-fragment=\"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\"\u003e)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eMagnetic Compass RM3100\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003ePatch GNSS Antenna 25*25*4mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eMCU STMG474CE, 170MHz\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUART2, onboard M9N GNSS module\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUART3(TX3), MSP Protocol\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eCAN, DroneCAN Protocol\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 14px;\"\u003eCAN bootloader LED, Blue\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eFast blinking,  Booting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eSlow blinking, working\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 14px;\"\u003eGNSS PPS LED, Green3.3V LED, Red\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eGreen LED OFF after powering on\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eblinking(1Hz) when GNSS has 3D fixed\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eInput voltage range: 4~6V (5V pad\/pin)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003ePower consumption: 100mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\" data-slate-fragment=\"JTdCJTIyb2JqZWN0JTIyJTNBJTIyZG9jdW1lbnQlMjIlMkMlMjJkYXRhJTIyJTNBJTdCJTdEJTJDJTIybm9kZXMlMjIlM0ElNUIlN0IlMjJvYmplY3QlMjIlM0ElMjJibG9jayUyMiUyQyUyMnR5cGUlMjIlM0ElMjJwYXJhZ3JhcGglMjIlMkMlMjJpc1ZvaWQlMjIlM0FmYWxzZSUyQyUyMmRhdGElMjIlM0ElN0IlN0QlMkMlMjJub2RlcyUyMiUzQSU1QiU3QiUyMm9iamVjdCUyMiUzQSUyMnRleHQlMjIlMkMlMjJsZWF2ZXMlMjIlM0ElNUIlN0IlMjJvYmplY3QlMjIlM0ElMjJsZWFmJTIyJTJDJTIydGV4dCUyMiUzQSUyMk9wZXJhdGluZyUyMFRlbXBlcmF0dXJlcyUyMiUyQyUyMm1hcmtzJTIyJTNBJTVCJTVEJTdEJTVEJTdEJTVEJTdEJTVEJTdE\"\u003eOperating Temperatures: -20~80 °C\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eDimensions - 36mm x 36mm x 12mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eWeight - 16g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003ePackage contains:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x M9N-G4-3100\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x JST-GH-4P to JST-GH-4P 20cm silicon wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eMounting base (1x PCB plate,  4x silicon grommets, 4x Nylon standoffs M3x7,  4x Nylon screws M3*8)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/679b8d875ed1c318M9N-G4-3100_Body_Image_01.png\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":63500254708061,"sku":"MTS-01-05-GNSS-M9N-G4-3100","price":91.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1738247711-37231100_dfd37633-57a5-42e7-b7ad-062281c0257d.jpg?v=1772032046"},{"product_id":"matek-systems-gnss-sam-m10q","title":"Matek Systems - GNSS SAM-M10Q","description":"\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003eSAM-M10Q\u003c\/strong\u003e uses multi-constellation GNSS module powered by u-blox SAM-M10Q-00B.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eThe SAM-M10Q features the u-blox M10 standard precision GNSS platform and provides exceptional sensitivity and acquisition time for all L1 GNSS signals. SAM-M10Q supports concurrent reception of four GNSS (GPS, GLONASS, Galileo, and BeiDou). The high number of visible satellites enables the receiver to select the best signals. This maximizes the position availability, in particular under challenging conditions such as in deep urban canyons. u-blox Super-S (Super-Signal) technology offers great RF sensitivity and can improve the dynamic position accuracy in non-line-of-sight scenarios.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eThe high-gain 15 x 15 mm2 patch antenna provides the best balance between performance and small size. The omnidirectional antenna radiation pattern increases flexibility for device installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003eMore details about the SAM-M10Q, pls check out \u003c\/span\u003e\u003ca style=\"font-size: 14px;\" href=\"https:\/\/www.u-blox.com\/en\/product\/sam-m10q-module\"\u003eu-blox SAM-M10Q\u003c\/a\u003e\u003cspan style=\"font-size: 14px;\"\u003e page\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003ePackage Includes\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x SAM-M10Q\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e1x JST-GH-4P to JST-GH-4P 20cm silicon wire\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eGNSS \u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/sam-m10q-module\"\u003eu-blox SAM-M10Q-00B\u003c\/a\u003e (GPS, GLONASS, Galileo and BeiDou)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eNo Magnetic Compass built-in\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003ePatch antenna 15*15*4mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eInput voltage range: 4~9V (5V pad\/pin)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003ePower consumption: 10mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUART baudrate: 9600 default\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eOperating Temperatures: -20~80 °C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUART(TX, RX) interface for GNSS SAM-M10Q-00B\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eJST-GH-4P connector (SM04B-GHS-TB). 1.27mm pitch\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eGNSS PPS LED, Green. (Solid ON after powering on,  blinking(1Hz) when GNSS get 3D fix)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eProtocol: UBX(u-blox)  5Hz@GPS+GAL+BDS B1C+GLO or NMEA 1Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e26mm*16mm*8mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e7.5g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003ca href=\"http:\/\/www.mateksys.com\/Downloads\/other\/SAM-M10Q_step.zip\"\u003eSAM-M10Q_step.zip\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eTips and Notes\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eINAV 5.0.0, Betaflight 4.3.0,  ArduPilot 4.3 or newer is required.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUBlox NEO-M9N, MAX-M10S, SAM-M10Q series all don’t have dataflash built in.  once GNSS is powered off and the supercapacitor run out. the settings will back to default.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eUBX protocol is bidirectional.  Flight controller firmware can change settings on GPS via UBX protocol. You don’t need to set GNSS module Baud and Frequency in u-center.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eThe default configuration on SAM-M10Q-00B with ublox FW 5.1 is concurrent reception of GPS, Galileo, GLONASS, and BeiDou B1C with QZSS and SBAS enabled.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eStart with u-blox GNSS FW3.01, timepulse is aligned with UTC time and that time is set valid only after leap second is downloaded. That could take up to 12.5 min. Probably PPS LED will not blink immediately after GPS has 3D fixed.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eThe SAM-M10Q provides the ability to reset the receiver. Bridging “RST” pad to Ground for at least 100 ms will trigger a cold start. RESET will delete all information and trigger a cold start. It should only be used as a recovery option. If you are sure wiring and setup are all right. but flight controller can’t detect the GNSS module(grey GPS icon), try doing reset.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eThe scratches on ceramic antenna are the result of tuning the antenna.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eTroubleshoot GPS related issues: \u003ca href=\"http:\/\/www.mateksys.com\/?p=5712#tab-id-6\"\u003ehttp:\/\/www.mateksys.com\/?p=5712#tab-id-6\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":63500308676957,"sku":"MTS-03-02-SAM-M10Q","price":26.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1013\/9127\/0237\/files\/1689694569-90978200_9ee6dc31-df93-452e-ad22-c81d4a1e6aac.jpg?v=1772032819"}],"url":"https:\/\/www.3dxr.co.uk\/collections\/matek-systems-gps-gnss.oembed","provider":"3DXR","version":"1.0","type":"link"}