Worldwide Delivery Available
We’re Here to Help! 01748 905 089
Free UK Delivery on orders over £99*

Holybro - PM06 V2-14S Power Module

Code: HB-04-07-PM06-V2-14S
  • £19.99 (inc. VAT)
24 In Stock Now | Usually dispatched within 24 hours
Order within for delivery on Friday 27th May
Loading...

Technical Specification:

  • Input voltage: 2S-14S
  • Power Module rated current: 60A
  • Power Module max current: 120A (
  • UBEC output: DC 5.1V~5.3V
  • UBEC output current: 3A Max (Note: To ensure proper heat dissipation, UBEC output current needs to be limited to
  • Voltage Divider: 18.182
  • Amperes per Volt: 36.364 

Mechanical Specification:

  • Dimensions: 35x35x5mm
  • Mounting hole: 30.5mm*30.5mm
  • Weight: 24g

PX4 QGroundControl Setup

  • Connector the Power Module to battery and connect the flight controller to your ground station via USB.
  • Open QGroundControl go Vehicle Setup and Power tab and Input the Number of Cells.
  • Ensure the Voltage Divider & Amps per Volt is correct.

 For more information with setting PX4 with QGround Control, refer to the PX4 Guide.

Ardupilot Mission Planner Setup

-Connector the Power Module to battery and connect the flight controller to your ground station via USB.

-Open Mission Planner, go to Setup page and Battery Monitor tab and select the following:

  • Monitor – “Analog Voltage and Current”
  • Sensor – “9: Holybro Pixhawk 4 PM”

-For Pixhawk 4, Pixhawk 4 Mini, Pix32v5, Pix32, select the following:

  • HW Ver – “0: CUAV V5/Pixhawk 4 or API “

Alternatively, input the following in the parameter list

  • BATT_VOLT_PIN: 0
  • BATT_CURR_PIN: 1

 -For Durandal, select the following:

  • HW Ver – “9: Durandal/ZealotH743”

Alternatively, input the following in the parameter list

  • BATT_VOLT_PIN: 16
  • BATT_CURR_PIN: 17

 For Pixhawk 5X

 

  • You will need to use a digital power module like the that end with a “D” such as the PM02D.

For more information regarding setting up Power Module with Mission Planner. Please refer to the Ardupilot Wiki Page.

Current Rating

 

The XT60 plug and 12AWG wire that PM06 comes with are rated for 30A continuous current and 60A instantaneous current (

Plug Specification               

Wire Size

Rated current: (4 hours, temperature rise

Burst Current: (1 minute,     temperature rise

XT60

12 AWG

30A

60A

XT90

10 AWG

45A

90A

XT120

8 AWG

60A

120A

 

Package Includes:

  •  1x Power Module
  • 1x 80mm XT60 connector wire (pre-soldered)
  • 1x Electrolytic capacitor: 220uF 63V (pre-soldered)
  • 1x JST GH 6pin cable

 

Free UK standard delivery for orders over £99*. (excludes certain items such as batteries) 

Next Day delivery available with DHL Express to the UK, USA and most of Europe available

Saturday Delivery Available in the UK

For full details on our delivery services click here

Be the first to review - PM06 V2-14S Power Module . Write a review
Contact us with any questions you have about this product
Top