Worldwide Delivery Available
We’re Here to Help! 01748 905 089
Free UK Delivery on orders over £99*

Holybro - Pixhawk4 mini - Combo with PM06 V2 and GPS

Code: HB-01-05-PH4-Mini-GPS-PM0
  • £169.00 (inc. VAT)
  • RRP £180.00 (inc. VAT)
10 In Stock Now | Usually dispatched within 24 hours
Order within for delivery on Tuesday 21st September
Loading...

Package includes

  • Pixhawk® 4 mini flight controller
  • GPS module
  • Power management board
  • Cable sets
Pixhawk 4 Mini
 
The Pixhawk® 4 Mini autopilot is designed for engineers and hobbyists who are looking to tap into the power of Pixhawk 4 but are working with smaller drones. Pixhawk 4 Mini takes the FMU processor and memory resources from the Pixhawk 4 while eliminating normally unused interfaces. This allows the Pixhawk 4 Mini to be small enough to fit in a 250mm racer drone. The Pixhawk 4 Mini is easy to install; the 2.54mm (0.1in) pitch connector makes it easier to connect the 8 PWM outputs to commercially available ESCs.
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
 
Product Features
 
Half the footprint of the Pixhawk® 4
The same FMU processor and memory resources as the Pixhawk 4
Aluminum casing for great thermal performance
Easy to connect to commercial ESCs
The latest sensor technology from Bosch® and InvenSense®
Redundant IMUs for reliable performance
NuttX real-time operating system
Pre-installed with the most recent PX4 firmware
Technical Specifications
FMU Processor: STM32F765
32 Bit Arm® Cortex®-M7, 216MHz, 2MB memory, 512KB RAM
On-board sensors
Accel/Gyro: ICM-20689
Accel/Gyro: BMI055
Mag: IST8310
Barometer: MS5611
GPS: ublox Neo-M8N GPS/GLONASS receiver; integrated magnetometer IST8310
Electrical Data
Voltage Ratings
Power Brick Input: 4.75~5.5V
USB Power Input: 4.75~5.25V
Servo Rail Input: 0~24V
Max current sensing: 120A
Mechanical Data
Dimensions: 38x55x15.5mm
Weight: 37.2g
 
Package Included
 
Pixhawk4 mini *1
Pixhawk4 GPS MODULE *1
PM06 V2 Power Management Board *1
I2C splitter Board *1
6 to 6 pin cable (power) *2
4 to 4 pin cable (CAN) *1
6 to 6 pin and 4 pin "Y"cable *1
6 to 6 pin cable(Debug) *1
PPM/SBUS out cable *1
XSR receiver cable *1
DSMX receiver cable *1
SBUS receiver cable *1
USB cable *1
'X'type folding pedestal mount  *1
70mm & 140mm carbon rod stand off *2
Foam Set *1
Pixhawk4 mini Quick Start Guide *1
 

Free UK standard delivery for orders over £99*. (excludes certain items such as batteries) 

Next Day delivery available with DHL Express to the UK, USA and most of Europe available

Saturday Delivery Available in the UK

For full details on our delivery services click here

Be the first to review Holybro - Pixhawk4 mini - Combo with PM06 V2 and GPS. Write a review
Contact us with any questions you have about this product
Top