Worldwide Delivery Available
We’re Here to Help! 01748 905 089
Free UK Delivery on orders over £99*

Holybro Pixhawk 5X Standard Set

Code: Pixhawk-5X-standard-set
  • From £229.90 (inc. VAT)
19 In Stock Now | Usually dispatched within 24 hours
Order within for delivery on Friday 28th January
Loading...

The Pixhawk® 5X is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv5X Open Standard and the Pixhawk® Autopilot Bus Standard. It comes with the latest PX4 Autopilot® pre-installed, temperature-controlled, triple redundancy, isolated sensor domain, continuing to deliver incredible performance and reliability.

 

Inside the Pixhawk® 5X, you can find an STMicroelectronics® based STM32F7, paired with sensor technology from Bosch®, InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications. The Pixhawk® 5X’s F7 microcontroller has 2MB flash memory and 512KB RAM. The PX4 Autopilot takes advantage of the increased power and RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models.

 

The FMUv5X open standard includes high-performance, low-noise IMUs on board, designed for better stabilization. Triple redundant IMU & double redundant barometer on separate buses. When the PX4 Autopilot detects a sensor failure, the system seamlessly switches to another to maintain flight control reliability, creating a safer more stable flight for all.

 

An independent LDO powers every sensor set with independent power control. A newly designed vibration isolations to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances. External sensor bus (SPI5) has two chip select lines and data-ready signals for additional sensors and payload with SPI-interface, and with an integrated Microchip Ethernet PHY (LAN8742AI-CZ-TR), high-speed communication with mission computers via ethernet is now supported. Two smart battery monitoring ports (SMBus), support for INA226 SMBus Power module.

 

The Pixhawk® 5X is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial application.

Key Design Points

Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk® Autopilot Bus connector, designed for flexible and customizable systems

Redundancy: 3x IMU sensors & 2x Barometer sensors on separate buses, allowing parallel and continuous operation even in the event of a hardware failure

Triple redundancy domains: Completely isolated sensor domains with separate buses and separate power control

Newly designed vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings

Ethernet interface for high-speed mission computer integration

Automated sensor calibration eliminating varying signals and temperature

IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs

Two smart batteries monitoring on SMBus

Additional GPIO line and 5V for the external NFC reader

Secure element for secure authentication of the drone (SE050)

 

Technical specification

FMU Processor: STM32F765

32 Bit Arm® Cortex®-M7, 216MHz, 2MB memory, 512KB RAM

IO Processor: STM32F100

32 Bit Arm® Cortex®-M3, 24MHz, 8KB SRAM

On-board sensors

Accel/Gyro: ICM-20649

Accel/Gyro: ICM-42688P

Accel/Gyro: ICM-20602

Mag: BMM150

Barometer: 2x BMP388

 

Electrical data

Voltage Ratings:

Max input voltage: 6V

USB Power Input: 4.75~5.25V

Servo Rail Input: 0~36V

 

Mechanical data

Dimensions

Flight Controller Module: 38.8 x 31.8 x 14.6mm

Standard Baseboard: 52.4 x 103.4 x 16.7mm

 

Weight

Flight Controller Module: 23g

Standard Baseboard: 51g

 

Interfaces

16- PWM servo outputs

R/C input for Spektrum / DSM

Dedicated R/C input for PPM and S.Bus input

Dedicated analog / PWM RSSI input and S.Bus output

4 general purpose serial ports

3 with full flow control

1 with separate 1A current limit

1 with I2C and additional GPIO line for external NFC reader

2 GPS ports

1 full GPS plus Safety Switch Port

1 basic GPS port

1 I2C port

1 Ethernet port

Transformerless Applications

100Mbps

1 SPI bus

2 chip select lines

2 data-ready lines

1 SPI SYNC line

1 SPI reset line

2 CAN Buses for CAN peripheral

CAN Bus has individual silent controls or ESC RX-MUX control

2 Power input ports with SMBus

1 AD & IO port

2 additional analog input

1 PWM/Capture input

2 Dedicated debug and GPIO lines

 

Standard Set Includes: 

  • Pixhawk 5X Flight Controller Module
  • Pixhawk 5X Standard Baseboard
  • Power Distribution Board
  • PM02D Power Module
  • Cable Set

Standard Set + M8N GPS Includes: 

  • Pixhawk 5X Flight Controller Module
  • Pixhawk 5X Standard Baseboard
  • Power Distribution Board
  • PM02D Power Module
  • Cable Set
  • M8N GPS

Standard Set + M9N GPS Includes: 

  • Pixhawk 5X Flight Controller Module
  • Pixhawk 5X Standard Baseboard
  • Power Distribution Board
  • PM02D Power Module
  • Cable Set
  • M9N GPS

Free UK standard delivery for orders over £99*. (excludes certain items such as batteries) 

Next Day delivery available with DHL Express to the UK, USA and most of Europe available

Saturday Delivery Available in the UK

For full details on our delivery services click here

Be the first to review Holybro Pixhawk 5X Standard Set. Write a review
Contact us with any questions you have about this product
Top