Next Day International Delivery Available
We’re Here to Help! 01748 905 089
Free UK Delivery on orders over £99*

Matek Systems - Flight Controller H743-WING V3

Code: MTS-01-02-FC-H743-WING-V3
  • £90.99 (inc. VAT)
16 In Stock Now   |   Usually dispatched within 24 hours
Order within for delivery on Tuesday 16th August
Loading...

**UPDATE** This is H743-WING Version 3

  • H743-WING-V2(Purple PCB) has been updated to V3(Blue PCB) since end Apr.2022.
  • IMU ICM42688-P(V3)+ICM42605 instead of MPU6000(V2)+ICM42605
  • Same functions, layout, wiring schematic & I/O mapping.

 

 *** V1/V2/V3 share same ArduPilot/INAV Target ***

 
ArduPilot
  • Current sensor range is 220A on H743-WING-V2/V3,  make sure you set the BATT_AMP_PERVLT to 66.7
  • with ArduPilot 4.1 or higher, set INS_ENABLE_MASK to 7 or default 127.
  • Pls download “plane 4.2.0 or newer” ArduPilot firmware for H743-WING-V3
  • It is recommended to use STM32CubeProgrammer to erase MCU and upload firmware.  check this blog 
INAV
  • Current sensor range is 220A on H743-WING-V2/V3,  make sure you set the Current Meter Scale to 150
  • H743-WING-V3 is not supported by INAV4.1 downloaded from configurator. pls download inav_4.1.0_MATEKH743_42688 from our website.
  • Starting with INAV5.0, they will share the same firmware.
Others
  • If the ESCs you are using don’t have enough capacitors integrated,  low ESR electrolytic capacitor is required for reducing ESC noise.

Link to H743-WING-V2 Quick Start Guide 

FC Specifications

  • MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash
  • IMU: MPU6000 (SPI1) & ICM42605 (SPI4)
  • Baro: Infineon DPS310 (I2C2)
  • OSD: AT7456E (SPI2)
  • Blackbox: MicroSD card slot (SDIO)
  • 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
  • 13x PWM outputs(including “LED” pad)
  • 2x I2C
  • 1x CAN
  • 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • 1x SPI3 breakout
  • USB/Beep Extender with Type-C(USB2.0)
  • Dual Camera Inputs switch
  • 5V/9V(12V) for Camera/VTX power switch
  • High-precision Current Sense (90A continuous, 220A peak)
  • Battery Voltage Sensor: 1K:10K (Scale 1100 in INAV,  BATT_VOLT_MULT 11.0 in ArduPilot)
  • ADC VB2 voltage divider: 1K:20K
  • ADC AirSpeed voltage divider: 20K:20K
  • Static power 160mA@5V

FC Firmware

  • ArduPilot(ChiBiOS): MATEKH743
  • INAV: MATEKH743

PDB

  • Input voltage range: 8~36V (3~8S LiPo) w/TVS protection
  • 2x ESC power pads
  • Current Senor: 220A,  3.3V ADC  (Scale 150 in INAV,  66.7 A/V in ArduPilot)
  • Sense resistor: 90A continuous, 220A peak.

BEC 5V output

  • Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
  • Output 5.15  +/- 0.1V DC
  • Continuous current 2 Amps,  3A Peak

BEC 9V /12V output

  • Designed for Video Transmitter, Camera, Gimbal ect.
  • Continuous current 2 Amps,  3A Peak
  • 12V option with Jumper pad

BEC Vx output

  • Designed for Servos
  • Voltage adjustable, 5V Default, 6V or 7.2V via jumper
  • Continuous current 8 Amps,  10A Peak

BEC 3.3V output

  • Linear Regulator
  • Continuous current: 200mA

Physical

  • Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
  • Dimensions: 54 x 36 x 13 mm
  • Weight: 30g with USB extender

Including

  • 1x H743-WING
  • 1x USB(Type-C)/Beep (Passive buzzer) Extender
  • 1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
  • 2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C port
  • 1x Rubycon ZLH 35V 470uF capacitor
  • Dupont 2.54 pins  (Board is shipped unsoldered)

 

 

Free UK standard delivery for orders over £99*. (excludes certain items such as batteries) 

Next Day delivery available with DHL Express to the UK, USA and most of Europe available

Saturday Delivery Available in the UK

For full details on our delivery services click here

Be the first to review - Flight Controller H743-WING V3. Write a review
Contact us with any questions you have about this product
Top