Worldwide Delivery Available
We’re Here to Help! 01748 905 089
Free UK Delivery on orders over £99*

Matek Systems - AP_PERIPH CAN GNSS M9N-F4-5883

Code: MTS-02-02-M9N-F4-5883
  • £64.50 (inc. VAT)
  • RRP £79.00 (inc. VAT)
15 In Stock Now | Usually dispatched within 24 hours
Order within for delivery on Friday 22nd October
Loading...

For the most up-to date settings please visit the Matek website.

This version has the QMC5883L compass. Its a GPS, CAN node and can even run as an FC.

  • M9N-F4 series is based on ArudPilots’ AP_Periph firmware,  It is a GNSS+COMPASS+BAROMETER+IMU peripheral with CAN/UAVCAN and UART/MSP interfaces, plus 4x spare UARTs, 1x I2C expansion bus for additional peripherals.
  • M9N-F4 uses multi-constellation GNSS powered by u-blox NEO-M9N , NEO-M9N is a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently.
  • M9N-F4 series is not just a AP_Periph with full AHRS sensors. It can also work as a flight controller with 9 PWM outputs.

Specifications

  • GNSS u-blox NEO-M9N (GPS, GLONASS, Galileo and BeiDou)
  • Magnetic Compass QMC5883L  (M9N-F4-5883)
  • Barometer DPS310
  • IMU ICM20602
  • MCU STM32F405RGT6
  • MicroSD socket
  • Patch GNSS Antenna 25*25*4mm
  • 4x spare UARTs(1,2,3,5),  UART4 for onboard NEO-M9N
  • 1x CAN, UAVCAN Protocol
  • 8x PWM +1x 2812LED outputs
  • 1x I2C, onboard DPS310 & QMC5883L(M9N-F4-5883)
  • MicroUSB and DFU button
  • Input voltage range: 4.5~5.3V (5V pad/pin)
  • Power consumption: 120mA
  • Operating Temperatures: -20~80 °C
  • M9N-F4-5883,  36mm*36mm*10mm, 17.3g

Includes

  • 1x M9N-F4-5883
  • 2x JST-GH-4P to JST-GH-4P 20cm silicon wire
  • 1x JST-SH-3P to JST-SH-3P 8cm silicon wire
  • Mounting base (1x PCB plate,  4x silicon grommets, 4x Nylon standoffs M3x7,  4x Nylon screws M3*8)

Firmwares

  • ArduPilot AP_Periph: F405-MatekGPS
  • ArduPilot Plane/Copter/Rover: MatekF405-CAN
  • INav Target: MATEKF405CAN

Tips & warning

  • M9N-F4 series don’t have 5V regulator built-in,  they must be powered by external 5V source(4.5~5.3V) over any 5V pad/pins.  Vbat pad supports battery voltage sensing only.

Free UK standard delivery for orders over £99*. (excludes certain items such as batteries) 

Next Day delivery available with DHL Express to the UK, USA and most of Europe available

Saturday Delivery Available in the UK

For full details on our delivery services click here

Be the first to review Matek Systems - AP_PERIPH CAN GNSS M9N-F4-5883. Write a review
Contact us with any questions you have about this product
Top